Shop
Straight Bar Load Cell 1kg
In stock
It has Four lead wires which can be connected to HX711 A/D Pressure Sensor. It is easy to use with driving voltage 5-10V and produce the output voltage as per the force changes over it.
Installation of the Sensor is also the simple task, it needs to fix one end through the screw hole and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.
Straight Bar Load Cell 40Kg
In stock
Applications
- Electronic platform scale
- Digital scale
- Parcel post scale
- Electronic balance
Straight MMCX TO RP-SMA ((inner needle )
In stock
Submersible Mini Water Pump 3-6V DC
In stock
DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.
Sunon 4010 5VDC Cooling Fan
In stock
This is a High-Quality 40 x 10 mm size Cooling Fan from Sunon. The cooling fan consists of a 4-pole Brushless DC Motor with a precise vapo bearing system, this cooling fan can deliver an airflow up to 8.0 CFM, which is sufficient enough to keep the electronics cool.
SW420 VIBRATION MODULE
In stock
If the module does not vibrate, the vibration switch was on the close state, the output of low output, the green indicator light. The product vibrates, vibration switches momentary disconnect, the output is driven high, the green light does not shine.
The output can connect to the microcontroller, which to detect high and low level; so as to detect whether the environment exists vibration, play a role in the alarm.
sx1308 dc – dc module
In stock
Features:
- Oscillation frequency 1.2MHz
- efficiency is as high as 95%
- The circuit has short circuit protection, overheating protection function
- 10k to adjust potentiometer, adjust the output voltage
SXDOOL 12038 12V DC COOLING FAN
In stock
12038B 12V 3P 2510 Package include: 1 Piece 120mm Cooling fan include fan grill and mounting screws & nuts Size:120x120x38mm Rated Voltage:12V 0.5A Bearing type: Dual Ball Bearing Speed: 3000RPM Air flow: 118CFM Noise:42dBA Connecter: XF2510-3Pin Cable Length: 30cm Life: 50000 hours Weight:220g/pcs
T motor 16×8 folding prop without Spinner
In stock
Features:
- Durable plastic construction provides both lightness and rigidity.
- Very strong and lightweight.
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, and good lifting capacity.
T Motor Air ESC 40A 6s
In stock
- 40A multi-aircraft electronic speed controller (ESC)
- Special core program for multi-rotor controllers
- Supports a signal frequency of up to 621 Hz
- Twisted-pair design throttle signal cable
T motor AT4120- 250KV BLDC
In stock
T-Motors AT-Type Electric Motors are especially designed for fixed-wing applications. They have a high temperature resistancy and enable highest flight stability.
T motor flame AT 115A 14S ESC
In stock
FEATURES:
- ALL DEVICES ARE ORIGINAL MADE , ENSURING THAT THE ESC HAS HIGH QUALITY AND HIGH RELIABILTY.
- STRONG FLOW REISTANCE.
- INPUT VOLTAGE ABNORMAL PROTECTION, BATTERY PROTECTION , BATTERY LOW VOLTAGE PROTECTION , OVER HEAT PROTECTION.
- ORDINARY START , SOFT START , ULTRA-SOFT START MODES , IT IS COMPATIBLE WITH FIXED WINGS AIRCRAFT AND HELICOPTER.
T12 RC with Cam
In stock
Features:
- 1. Dual Antenna plus dual RF module with integrated control algorithms ensuring reliable communication via full angle high gain antennas. The T12 uses the latest in FHSS technology to achieve perfect control and operation.
- 2. Integrated digital video transmission able to achieve up to 20 KM transmission under SD resolution.
- 3. Internal integrated data link able t achieve up to 30km transmission.
- 4. Parameter adjustment via APP with upgraded traditional OSD to touch panel control.
T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
In stock
This is T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw. It is used with 8mm Lead Screw in general machine tools such as 3D printing.
These nuts are mainly used for high transmission, precision transmission equipment, with elimination gap, elimination of poor, silencer function, anti-vibration functions.
Suitable for 3D printer Reprap Z axis, CNC.
TANK ULTIMATE PLUS VTX
In stock
The RUSH Tank Ultimate Plus uses the form factor of the Tank Racing Edition but packs the performance of the Tank Ultimate, plus a built in AGC Mic! is a high quality Video Transmitter featuring strong anti-interference ability, power filtering, and stable transmission. Reducing the size and weight by removing all extraneous mounting material makes this VTX a great choice for your next race build. They kept the full metal casing so it’s till a TANK. Rush’s LOCK-ON technology eliminates frequency drift, allowing up to 8 quads in the air at once with no interference!
Tarot 12S distribution board TL2996
In stock
Power distribution management module 12S power supply is composed of two 6S batteries in series,so two batteries need to be plugged in to provide power supply.
If only 6S power supply is required,only the leftmost red positive pole and the rightmost black negative pole are connected,and the two red and black wires in the middle are short-circuited series connection points,no need to connect
Tarot 1765 Carbon Fibre Prop Pair ( TL2948)
In stock
YOUR PURCHASE INCLUDES:
2x Cw propeller
2x CCW propeller
4x Copper sleeve (internal and external high 3mm * 5mm * 3.5mm)
Tarot TL2955 330KV 4008 BLDC Motor
In stock
Features:
- Powerful brushless motor for multirotor applications
- Stator size of 4008 for increased torque and power
- High-quality construction for long-lasting performance
- Dual-bearing support for smooth and stable operation
- Neodymium magnets for improved power output and efficiency
- Multiple mounting options for easy installation
- Efficient cooling mechanisms for optimal performance
- High voltage compatibility for use with high voltage power systems
- Suitable for heavy lift applications requiring a strong and reliable motor.