Shop
IMAX B6AC Charger/Discharger 1-6 Cells
In stock
The iMAX-B6AC can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. It features a built-in adapter that can be powered from 100–240 VAC, or it can alternatively be powered via an 11–18 VDC input. With its versatile charging capabilities and advanced features like input power monitoring, delta-peak sensitivity, cyclic charging and discharging, and more, the iMAX-B6AC is a great addition to the workbench of any RC, DIY, or robot enthusiast.
IMU 10DOF MPU6050+HMC5883L+BMP085 GY88
In stock
The HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor has 3 in one MPU6050 3x Axis accelerometer sensor and 3x Axis gyroscope sensor, HMC5883L Triple Axis Magnetometer, BMP180 Barometric Pressure Sensor.
It possesses a built-in ultra-low noise linear LDO voltage regulator, built-in onboard filters, which reduce noise from the motor and other high current electronics. It has all sensors connected to the I2C bus, you can easily select two I2C addresses for MPU6050 by soldered jumper, power LED, and build in the Logic level converter for I2C
IMX378-190 12.3MP CAMERA
In stock
Raspberry Pi is transitioning from a legacy camera software stack based on proprietary Broadcom GPU code to an open-source stack based on lbcamera. Raspberry Pi OS images from Bullseye onwards will contain only the libcamera-based stack. If you use the newest Bullseye Raspberry Pi OS, the libcamera is pre-installed. If you want to use the legacy camera stack (Raspicam), please move to the Raspicam guide.
INA219 MODULE
In stock
This New CJMCU-219 INA219 I2C Interface No drift Bi-directional Current / Power Supply Monitoring Module. Get yours today at the Best Price from the official reseller INDIA only at Robu, the CJMCU-219 INA219 I2C Interface No drift Bi-directional Current / Power Supply Monitoring Module includes all you need to hook up.
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control integrated circuit (IC). INA219 has the industry’s highest precision and the small size, not only can monitor the pressure drop on the shunt resistor, sensing shunt power supply voltage, at the same time also can calculate the power.
This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219 chip on this breakout to measure both the high side voltage and DC current draw over I2C with 1% precision.
Infrared IR Wireless Remote Control Module Kit for Arduino with battery
In stock
Features :
- Depending on the surrounding environment and the sensitivity of the receiver the transmission distance may be affected.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
Internal PCB Antenna 2G / 3G / 4G / 5G / WiFi Applications
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna.
Internal PCB Antenna for 2G / 3G / 4G Applications
In stock
This is a PCB Antenna having a frequency of 698-960MHz & 1710-2690MHz with 1.5dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.
IR Sensor Module
In stock
Infrared Obstacle Avoidance IR Sensor Module (Active Low) has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.The module features a 3 wire interface with Vcc, GND, and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine-tune the range of operation, the effective distance range is 2cm to 80cm.
IRDA MODULE
In stock
Inductive object output 0, output 1 when not sensed, can be directly connected to 3V and 5V micro-controller IO port.
The sensing distance is 2 to 30 cm, the distance is long, and the anti-interference ability is good.
Fast speed, suitable for intelligent car obstacle avoidance, black and white line tracking, anti-drop, product counter, line cutting, liquid level detection, etc.
IRF520 MOSFET Driver Module
In stock
You connect the power for the device you want to control the Vin and GND. You connect your device to the V+ and V- screw terminals. When the SIG line is HIGH, a little LED lights up, and the GND is ‘connected’ to the V-. When the SIG line is LOW, the LED turns off, and the GND becomes ‘disconnected’ to the V-. The V+ and Vin are continuously connected.
You can power this device from your Arduino, VCC goes to the 5V connection and GND to the GND pin on your Arduino.
IRFB3710 MOSFET Transistor
In stock
- Part Number: IRF3710
- MAKE: Doingter
- Dynamic dv/dt Rating
- Advanced Process Technology
- Ultra Low ON-Resistance
- 175°C Operating Temperature
- Fast Switching
- Ease of Paralleling
- Simple Drive Requirements
IRFP 264
In stock
- Advanced Process Technology
- Ultra-Low On-Resistance
- 175°C Operating Temperature
- Fast Switching
- Lead-Free, RoHS Compliant.
IRFP 4321
In stock
RFP4321PbF Applications l Motion Control Applications l High Efficiency Synchronous Rectification in SMPS l Uninterruptible Power Supply l Hard Switched and High Frequency Circuits Benefits l Low RDSON Reduces Losses l Low Gate Charge Improves the Switching Performance www.DataSheet4U.com l Improved Diode Recovery Improves Switching & EMI Performance l 30V Gate Voltage Rating Improves Robustness l Fully Characterized Avalanche SOA HEXFET® Power MOSFET VDSS RDS(on) typ. max. ID D 150V 12m: 15.5m: 78A D G S G D S TO-247AC D S G Gate Drain Source Absolute Maximum Ratings Symbol ID @ TC = 25°C ID @ TC = 100°C IDM PD @TC = 25°C VGS EAS (Thermally limited) TJ TSTG Parameter Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current d Maximum Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy e Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds (1.6mm from case) Mounting torque, 6-32 or M3 screw Max. 78 c 55 330 310 2.0 ±30 210 -55 to + 175 300 10lbxin (1.1Nxm) Typ. ––– 0.24 ––– Max. 0.49 ––– 40 Units A W W/°C V mJ °C Thermal Resistance Parameter RθJC RθCS RθJA Junction-to-Case g Case-to-Sink, Flat, Greased Surface Junction-to-Ambient g Units °C/W www.irf.com 1 6/23/06 IRFP4321PbF Static @ TJ = 25°C (unless otherwise specified) Symbol V(BR)DSS Parameter Drain-to-Source Breakdown Voltage Min. Typ. Max. Units 150 ––– ––– 3.0 ––– ––– ––– –.
ISD1820 Voice Recording and Play Back
In stock
The chip pin leads, through the microcontroller to control operation.
This voice record/playback device is based on the ISD1820 chip, which can record/playback multiple-message. It can offer true single-chip voice recording, non-volatile storage, and playback capability for 8 to 20 seconds. For the sampling rate of 3.2KHz, it can record for the total duration of 20 seconds.
ISDT BattGo BG-8S Smart Battery Checker
In stock
Features:
- Provides precise measurement of battery capacity, voltage, current, and energy consumption.
- The device supports a wide range of input voltages, ranging from 0.8V to 15V for single-cell (1s) batteries and 0.8V to 4.8V for 2-8S batteries.
- Compatible with various battery chemistries including LiPo, LiFe, LiHv, and NiMH.
- Accommodates battery configurations from 1 to 8 cells (1-8S), offering versatility for various battery setups.
- Features support for USB charging, including QC 2.0 / 3.0 and BC1.2 standards, enabling efficient charging capabilities.
- Offers advanced functionality for smart batteries, allowing users to customize charging and discharging settings.
- Provides the ability to read detailed battery information and usage history, enhancing monitoring and optimization capabilities.
- Offers comprehensive battery management capabilities for maintaining and optimizing battery health.
- Provides multiple functions including battery capacity checking and cell balancing, making it a versatile tool for battery testing and monitoring.
JHD 12864 LCD Display with Blue Backlight
In stock
Graphic Lcd 128*64 (Blue) is a framed graphical LCD 128 x 64px liquid crystal display with backlight. This unit is a very clear STN type LCD with a simple command interface. This new v2.0 module includes the negative voltage circuitry on board.
JIYI FLOW METER
In stock
Features:
- Non-intrusive measurement
- Wide flow range
- Compatibility with various fluids
- Multiple pipe sizes and materials
- High accuracy and precision
- User-friendly interface