TOOL

1. Material: Bronze, Plastic
2. Display Type: LCD
3. Number of Counts:2000
4. LED Indicators: No
5. Audible Continuity Test: Yes
6. Data Freeze: Yes
7. Autoranging: Yes
8. Reading Storage: Yes
9. Backlight: Yes
10. PC Connectivity: No

Features :

• Smart Protection at Ω range
• Null DCV
• Gilded Test Leads
• Speacial circuit for testing at Max. 20/200MΩ just with 1.5V batteries (9V Battery is not required)

• Dt-830D – When testing the temperature, connect the temperature probe to V 0 mA jack or COM jack. Please refer to the attached instruction manual for the operating instructions.
• Ac Dc Measuring Voltage Current. – When testing dc voltage, ac voltage, dc current, resistance, diode, buzzer, and battery, connect the red test lead to the v 0 ma jack and the black test lead to the com jack
• When testing the current more than 200ma, connect the red test lead to the load jack and the black test lead to the com jack
• Small multi-meter for your day-to-day needs
• Digital Yellow Multimeter has Square wave output: the frequency is 50Hz, and the voltage is approx 3Vp-p.The output jack is “V ohm mA” and “COM”

Features:

1. 3 ½ Digital Multimeter with Manual Range
2. Live Wire Recognition
3. Live Remote Control Testing
4. Full Overload Protection

• NO power off under natural operations.
• Data hold Max & min value hold.
• Large lcd display with Auto/ manual range.
• Capacitince , Frequency / Duty cycle , Temperature and Transistor test .

Features:

1. Compact True-RMS digital multimeter for field service
2. Includes: meter, holster, 4 mm silicone test lead set
3. Easy one-handed operation of the meter
4. Min/Max/Average to record signal fluctuations

Features:

1. 600 V Cat III safety rating
2. 50% bigger display with bright white backlight
3. Voltage, resistance, continuity, capacitance
4. Input terminal for ac and dc current measurements to 10 A current
5. Diode test, data hold

Lightweight, thin and compact, the new 362 Fluke Clamp Meter is designed to fit easily in your pocket. The small 18 mm triangular jaw allows access into tight places where other clamp meters can’t reach, while providing the accuracy you can trust from a Fluke tool. This durable clamp meter is a must-have for basic maintenance clamp measurements.

• 200A AC and DC current
• 600V AC and DC Voltage
• 3000 Ω resistance range, continuity detection
• Zero function allows the display to be cleared for DC measurements
• Data Hold function
• CAT III 600 V safety rating

1. 1999 Count.
2. Terminal Shutter Interlock Mechanism.
3. Diode test: Yes
4. Transistor Testing: Yes
5. Continuity Buzzer: Approx. < 70W

1. Display 2000 counts
2. AC current measurement
3. Data Hold
4. Reliable and accurate
5. Ideal for electrical troubleshooting
6. Low Battery Display

This meter is a compact, rugged, battery operated, handheld 3.5 inch LCD Display

1. Pocket Size and 2000 counts LCD Display
2. Tests AC/DC Voltage, DC Current and Resistance
3. Transistor Check, Diode and Continuity Test
4. Display Back Light
5. Data Hold
6. Audible continuity
7. Transistor HFE test
8. Low battery indication
9. Rubber hostler for good grip.

• DC Voltage Range : 1000V
• Environment temperature and humidity : 0-40 °C (<80% RH, <10°C, it is not to be considered).
• Storage temperature and humidity : 0-60 °C (<70% RH, remove the battery).
• Temperature coefficient: 0.1 Accuracy/°C (<18°C or >28°C).
• AC Voltage Range : 750V
• Resistance : 200MΩ
• Power Supply : 1x9V 6F22 Battery
• Product Size : 195mmx95mmx55mm
• Product Weight : 366gm

Multimeter Test probe -(smd)pointed pin All Type Of Mesuring Testing Instrument.

Features :

1. H-12cm L-6cm W-50gm.
2. A versatile tool for cutting copper and aluminum conductors from 0.8mm to 1.2mm.
3. Made out of high-grade alloy steel with black oxide finish heat treated to 60 HRC on cutting edges.
4. Suitable for dressing components on printed circuit boards.
5. Handles made out of high-grade ABS plastics.

Measures

• Power (W)
• Power Factor (PF)
• Carbon Emission (CO2 in Kg)
• Total Used Time (MIN)
• Money (CU)
• Tariff (CU/KWh)
• Timer (DHH:MM)
• Frequency (Hz)
• Energy (KWh)
• TRMS Current (mA)
• TRMS Voltage (V)

Features :

1. Colour: red, green, yellow, white and black.
2. Type: double-ended crocodile/alligator clips.
3. Colour-coded insulated leads allow you to test circuits without crossing wires or causing shorts with each other.
4. Easy for installation and safety for use with the colour-coded insulation plastic cover on clips.
5. Alligator Clips Electrical DIY Test Leads 10pcs For Test Leads Double-ended Crocodile Clips Roach Clip.

USES:

1. Electrical switchboards 2. HVAC systems 3. Electrical circuit faults detection 4. Installation or maintenance of electronics/factory equipment 5. Electronics component development, circuit board design 6. Users who need to distinguish between neutral/live wire frequently