SOLDERING PRODUCTS

How to replace the heating element in a soldering iron

Replacing the heating element in a soldering iron is a relatively straightforward process. Here’s a general guide on how to do it:

1. Disassemble the Soldering Iron: Depending on the model, you may need to unscrew or detach the handle or other parts to access the heating element. Follow the manufacturer’s instructions or consult the soldering iron’s user manual if available.
2. Locate the Heating Element: Once you have access to the internal components, identify the heating element. It is usually a metal coil or ceramic rod located near the tip of the soldering iron.
3. Disconnect the Wiring: Carefully disconnect the wires that are connected to the heating element. Take note of their positions or take a photo to ensure proper reconnection later.
4. Remove the Old Heating Element: Loosen any fasteners or screws holding the heating element in place. Gently pull out the old heating element, being cautious not to damage any surrounding components.
5. Install the New Heating Element: Take the new heating element and carefully insert it into the designated slot. Secure it in place using the appropriate fasteners or screws.
6. Reconnect the Wiring: Reattach the wires to their corresponding terminals on the new heating element. Ensure a secure connection, double-checking the positions based on the earlier notes or photo.
7. Reassemble the Soldering Iron: Put the soldering iron back together by reattaching or screwing in any previously removed parts, ensuring a proper fit.
8. Test the Soldering Iron: Plug in the soldering iron and allow it to heat up. Confirm that the new heating element is functioning correctly by checking if the tip heats up to the desired temperature.

Applications:

• Can be used for Heat shrink tube
• PCB or SMD rework
• Coating Removal

Replacing the heating element in a soldering iron is a relatively straightforward process. Here’s a general guide on how to do it:

1. Disassemble the Soldering Iron: Depending on the model, you may need to unscrew or detach the handle or other parts to access the heating element. Follow the manufacturer’s instructions or consult the soldering iron’s user manual if available.
2. Locate the Heating Element: Once you have access to the internal components, identify the heating element. It is usually a metal coil or ceramic rod located near the tip of the soldering iron.
3. Disconnect the Wiring: Carefully disconnect the wires that are connected to the heating element. Take note of their positions or take a photo to ensure proper reconnection later.
4. Remove the Old Heating Element: Loosen any fasteners or screws holding the heating element in place. Gently pull out the old heating element, being cautious not to damage any surrounding components.
5. Install the New Heating Element: Take the new heating element and carefully insert it into the designated slot. Secure it in place using the appropriate fasteners or screws.
6. Reconnect the Wiring: Reattach the wires to their corresponding terminals on the new heating element. Ensure a secure connection, double-checking the positions based on the earlier notes or photos.
7. Reassemble the Soldering Iron: Put the soldering iron back together by reattaching or screwing in any previously removed parts, ensuring a proper fit.
8. Test the Soldering Iron: Plug in the soldering iron and allow it to heat up. Confirm that the new heating element is functioning correctly by checking if the tip heats up to the desired temperature.

Specification for 75 watt Soldering Element

• Type : Spare Soldering Element
• Watt : 75 Watt
• Voltage : 230 Volts
• Material : Stainless Steel

Additional Information :

• Manufacturer : Soldron
• Wattage : 75 Watts

• SOLDRON 100W SPADE LONG LIFE BIT FOR HEAVY DUTY SOLDERING IRON.
• TO BE USED WITH THE SOLDRON 100W SOLDERING IRON TIP .
• 8MM SPADE NICKEL PLATED TIP .
• SLIDE ON TECHNOLOGY FOR TIP  REPLACEMENT.

1. Power rating is 25W
2. Plated with Nickel
3. Durable and Long Life Total Length: 75 mm.
4. Slide-on technology for tip replacement.

• Power rating is 25W
• Plated with Nickel
• Durable and Long Life Total Length: 75 mm.
• Slide-on technology for tip replacement.

• SOLDRON 35WATTAGE NICKEL PLATED BIT .
• TO BE USED WITH SOLDRON 35W SOLDERING IRON.
• SLIDE ON TECHNOLOGY FORTIP REPLACEMENT.
• IDEALLY  TO BE USED WITH SOLDERING STATIONS AS ITS VOLTAGE SENSITIVE WILL BE DAMAGED.
• COMES WITH AN ISOLATED ELEMENT AND LONG LIFE ALUMINIUM COATED TIP .

• 50W 75MM  length bit ( soldering iron tip ) is hight quality soldering iron tip .
• IT CAN BE USED WITH ANY STANDARD 50W SOLDERING IRON.
• HIGH-QUALITY ORIGINAL SOLDERING IRON BIT.
• SLIDE ON TECHNOLOGY FOR TIP REPLACEMENT.
• THIS IS 50W NICKLE PLATED SPADE 3MM BIT WITH FLAT SPADE TIP.

Soldron 75w Spade Premium Grade Long Life Bit for Heavy Duty Soldering.

To be used with the Soldron 75W Soldering Iron.

• SOLDRON 35WATTAGE NICKEL PLATED BIT .
• TO BE USED WITH SOLDRON 35W SOLDERING IRON.
• SLIDE ON TECHNOLOGY FORTIP REPLACEMENT.
• IDEALLY  TO BE USED WITH SOLDERING STATIONS AS ITS VOLTAGE SENSITIVE WILL BE DAMAGED.
• COMES WITH AN ISOLATED ELEMENT AND LONG LIFE ALUMINIUM COATED TIP .

Specifications:-

• Tip Shape: Fine Needle
• Coated with Ceramic
• Tip Size: 1mm

This is Soldron CB25N3 Black 25W Ceramic Coated Delux Needle Bit for Soldron 25w soldering iron. The Soldering bit is a High-Quality Soldering Iron Tip. This is a Ceramic Coated 3mm 25 Watt Chisel tip; it can be used with Soldron 25 W soldering iron.

Upgrade your soldering gun with a new tip, you’ll get better & faster solder joints and the whole process will be much more enjoyable. They’re fast to swap, takes only 30 seconds to change out.

• SBN1 DELUXE FINE NEEDLE BIT FOR SOLDRON 936/938/960/878D/740 STATIONS
• TO BE USED WITH SOLDRON 936/938/960/878D/740 STATIONS
• COMPACTIBLE WITH SOLDRON SID60A SOLDRON DIGITAL TEMPERATURE  ADJUSTABLE SOLDERING IRON.
• BASE WITH NICKLE AND COVER WITH BLACK CERAMIC

• Reliable and Sturdy tool
• Aluminum tip to withstand high temperatures without any melting
• Easy to use