RPI Accessories

Featuring the same 8-megapixel image sensor as the standard Raspberry Pi camera with the infrared cut-off filter removed to increase IR light sensitivity. The Pi NoIR is compatible with all Raspberry Pi models and provides high
definition, high sensitivity, low crosstalk, and low noise image capture in an ultra small and lightweight design. The camera module connects to the Raspberry Pi board via the CSI connector which is capable of extremely high data rates and it exclusively carries pixel data to the processor.

The infrared Camera Module v2 (Pi NoIR) replaced the original PiNoIR Camera Module in April 2016. The v2 Pi NoIR has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).

The Raspberry Pi Debug Probe is provided as a kit, containing the probe hardware in a plastic case, and a set of cables: a USB cable, and three different types of debug cables to cover the vast majority of use cases. While it has been designed primarily for use with Raspberry Pi debug targets, the Debug Probe provides standard CMSIS-DAP debug and UART interfaces over USB; it can therefore be used to debug other targets, or simply as a cost-effective USB-to-UART cable.

The Raspberry Pi High-Quality Camera is an affordable high-quality camera from Raspberry Pi. It offers a 12-megapixel resolution and a 7.9mm-diagonal sensor for impressive low-light performance. The M12 Mount variant is designed to work with most interchangeable M12 lenses, and the CS Mount variant is designed to work with interchangeable lenses in both CS- and C-mount form factors (C-mount lenses require the use of the C-CS adapter included with this variant). Other lens form factors can be accommodated using third-party lens adapters.

This Official Raspberry Pi M12 Lens with 12 Megapixel resolution having  8mm lense size can be use for portrait photography. The lens has 56 deg FOV. This camera module will accept any M12 mount lens. It will not work with C/CS mount lenses!

The T6712DV Raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third-party manufacturers It is a specially designed power supply to keep feeding your Pi the steady 2.5A it needs for proper performance. With the official Raspberry Pi logo engraved on the case, it follows all standards set by Raspberry Pi officials.

Almost one and half-year before Raspberry Pi Foundation had launched a revolutionary update on their Single Board Computer (SBC) Pi 3 and become the most popular Microcontroller board in the community which is known as a Raspberry Pi 4. On the same timeline, the Raspberry Pi Foundation came with a new astonishing SBC named Raspberry Pi Pico.

The main highlighted thing about RPi Pico is the Lowest cost and Smallest size development board from Raspberry Pi Foundation ever.

Network your Pico for a complete IoT solution. Raspberry Pi Pico W comes with a fully certified module on board featuring 2.4GHz 802.11n wireless LAN, making it the perfect solution for loT applications and projects requiring wireless communication.At the heart of each product is RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz; 256KB
RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for code and data
storage. Raspberry Pi Pico W and Pico WH incorporate an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN,
and Bluetooth 5.2; of these, only wireless LAN is supported at launch.

Raspberry Pi Sense HAT for the Pi 3/2/B+/A+ Model is a sensor-packed add-on to your Raspberry Pi 3, 2, B+ and A+ boards. It mounts right on top of your Raspberry Pi and all you need to do is run your code.

Raspberry Pi Sense HAT has integrated sensors that can measure temperature, humidity, acceleration, pressure and 3D orientation. Also, you get an 8×8 LED matrix for displaying data read through all these sensors. Writing programs for the Sense HAT are very simple with a Python library available to get started quickly and easily.

Raspberry Pi WS1132712 12MP 2.7MM Wide angle lens is the 2.7mm Wide Angle Lens, an add-on for the M12 Raspberry Pi High-Quality Camera. It has a wide field of view and a variety of uses, like CCTV applications, or of course, cat photos. Includes a thumbscrew to quickly and easily assemble onto the HQ Camera Board.

Raspberry Pi WS1132712 12MP 2.7MM Wide angle lenses are good for getting shots of a big area, wildlife cameras, security cameras, doorbell cams, etc.

As u know the Raspberry Pi Zero W has been well performed and done its trade to enhance this the Raspberry has launched the brand new Raspberry Pi Zero 2 W which is the newest version to prior. Day by Day raspberry pi has reduced its dimensions with flawless technology into it this time the RPI Zero 2 W comes with a size of only 65mm long by 30mm wide and at a very economical price. With the addition of wireless LAN and Bluetooth, the Raspberry Pi Zero W2 is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero W2 has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO, allowing you to use only what your project requires.

The Raspberry Pi Zero W is new and improved with a whopping upgrade! Can you guess what it is? (Hint: W). No, it’s not just a letter, it’s WiFi!

That’s right, one of our favorite type of upgrades has reached the Raspberry Pi Zero board. Built-in WiFi is made possible with the BCM43143 WiFi chip addition. Sound familiar? A similar chip was also added to the Raspberry Pi 3 Model B. And like the Pi 3, the Pi Zero W also has Bluetooth Low Energy (BLE) on board.

We love this type of upgrade because we can ditch irritating communication peripherals like an ethernet cable or dongle. Best yet, it’s nearly identical in form factor, connections, and mounting holes as the Pi Zero v1.3 so you can use almost all of the same accessories-just without the WiFi ones!

The RJ45 CAT5 0.8M Ethernet Patch LAN Cable is 1m long and has been tested for compatibility with the Raspberry Pi. It’s the perfect low-cost option to get your Raspberry Pi on the internet as quickly as possible and includes gold-plated connectors for high-quality transfer speeds.

Ethernet cable is more flexible and can easily bend without any strain. It can carry over stable 25 Watts power along with Ethernet data using the power over Ethernet (PoE) feature of this cable.

Give the power to your project with Sandisk Micro SD/SDHC 16GB Class 10 Memory Card. A1 series memory card, new and made for APP or operating system to load and run more faster and smoother ever before. With speed up to 98 MB/s Shoot, save and share more with high speed. Built to perform in harsh conditions, SanDisk Ultra microSDHC UHS-I cards are Moistureproof, temperature proof, shockproof, and X-ray proof.