DC MOTORS

This is a 12V DC Solar Mini Pump with a working voltage of 12 V DC. The pump can be used with an Aquarium or any other small solar-based pumping application. It can be also used with Sanitizer Dispenser.

Package Include 4 x 716 Motor; Note: when you install the propeller, press and hold the back of the motor to prevent damage to the motor.

An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections

This is the DC motor, which can be used in any DIY project or in the small toys. With an operating voltage range of 3V-6V this motors can be operated using  two AA batteries or with a 5V USB power supply.

If you are wandering to build a Project with a pump and don’t know what will be the best pump for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your project.

This DC6-12V MINI Aquarium Water Pump R385 is the perfect choice for any project that requires water to be moved from one place to another.

This pump can be used in:

1. Small aquarium pump
2. Automatic plant watering system

This is a low cost mini submersible type water pump that works on 3-6V DC. It is extremely simple and easy to use. This Pump has one inlet valve and one outet valve. Connect the inlet valve to your water source and outlet valve to your desired location and power the motor with 3-6V to start pumping water.

Great for building science projects, fire-extinguishers, fire fighting robots, fountains, waterfalls, plant watering systems etc.

This motor is small, compact and light. It can be controlled from a micro controller/Arduino using our DC Motor Drivers or one of our Relay Boards. You may use our 5V SMPS Power Supply Adapter to run this pump. You may also use our 6V Solar Panel to run the pump with an appropriate 6V voltage regulator.

This pump can be used under submersible and non submersible conditions.

Compatible with most of rotary tools used in hardware,hobby,home,etc. Suitable for installation inside diameter of less than 3.0mm drill,electric grinding,hanging mill,hose above. Suitable for use with sheet iron, aluminum, copper, plastic etc. Comes with 5 different size to meet your need, Drill collet size: 05mm, 10mm, 15mm, 25mm, 30mm.

Drill chuck for 775 motors (5mm shaft) Strong impact resistance. Compatible with impact drill and different power electric drill. Clamping range: 1.5 mm-10 mm drill, the maximum clamping 10 mm. Adaptor Connection size: (inner hole diameter is 5 mm) for 775 motors, Drill, and woodworking machine. The shank with a screw can be tight and flexed for you. Maximum clamping fit motor shaft diameter 5.00 mm Package included: Drill chuck, 5 mm motor Adaptor, 2mm Allen key, Drill chuck key.

High-quality wheels for coupling with BO type of DC motors. This wheel can be coupled to BO-type motors by coupling it. You can make your own robot by using these the same, it will balance your bot as it has a better grip and provides incredible motion.A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight make it suitable for in-circuit placement. This motor comes with a 66mm Diameter wheel for Plastic Gear Motors and an 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Housing material: Tough ABS Winding Material: Copper Power source: Battery / Power Supply 12 Volt DC Adapter 3 Amp Voltage: DC12V Power: 100W Working current: 4-6.5A Max Output / Suction / Suction Power: 8L/MIN Max pressure/ Bursting pressure of water: 150 PSI /10 BAR / 0.80Mpa Working: Continuous Heat Resistance: 0°C~60° Self-priming: 1M Inlet: 10mm hose Outlet: 18mm Screw Pump Size: 19cm(L) x 14cm(B) x 5cm(H) Pump Weight: 1.110 Kg NOTE: BBRG, Thermal Protected. Auto ON / OFF (The pump is equipped with an auto on / off switch, when the water output flow is closed the pump will automatically turn off, and vice versa when opened it will automatically turn on)

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on performance and durability while retaining the same affordability.

Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.

Submersible Pumps are efficient for pumping out septic tanks. Fluid is transferred into hoses to storage tanks and taken to a treatment facility. Submersible pumps are often used to pump excess water from work sites or flooded basements on construction sites. They can also be used to pump slurries Submersible pumps are centrifugal pumps whose hydraulic components (pump casing, impeller, diffuser element) are flooded by the fluid handled. Usually, this type of pump is not fitted with a suction line. A submersible pump whose motor is arranged above the floor is referred to as a vertical shaft submersible pump

This is Johnson Geared Motor (B Grade) 12 V DC 200 RPM.

These “B Grade Johnson DC Motors” are in fame for their performance even at a low price compared to “Grade A Quality Johnson DC Motors”. 

It is a simple DC motor featuring metal gearbox for driving the shaft of the motor, so it is a mechanically commutated electric motor which is powered from DC supply. The Johnson Geared Motors are known for their compact size and massive torque-speed characteristic.

Our DC gear motor and wheelset for making robots! These motors are lightweight, high torque and low RPM. They can climb hills and have excellent traction, plus you can mount the wheel on either side of the motor with its single shaft.

The CYS-S8218 is a well designed and high quality servo which is digital, fitted with metal gears for reliability. It is made of high quality material, which may make your operation much more remarkable. CYS-S8218 is Digital Metal Gear High Torque Servo Motor. This Motor is compatible with Futuba, JR, Sanwa, Hitee series. Speed rate is 0.20–0.22sec/60°at (6V) . 0.18–0.2sec/60°at(7.2V).

New Micro 3.7g Mini Servo for Control Aeromodelling aircraft flight direction

Features

• High Torque Performance: The N20 6-12V 60RPM metal gear motor stands out with its high torque capabilities. And also ensure it can easily handle device who need robust and powerful rotational force.
• Dust Cover Protection: It also Feature a built in dust cover. This N20 dc gear motor is well protected against external particles.  The dust cover also ensure the motor work in various environment.
• Waterproof Design: With a waterproof design, the N20 60RPM dc gear motor is ready to perform in harsh conditions. Its waterproof features add an extra layer of durability, making it a versatile solution for applications where exposure to liquids is a concern.
• JST Wire Connectivity: The N20 6-12V 60RPM metal gear motor comes equipped with a JST wire. And also provide a easy and secure connection for easy use in electronic project. This feature streamlines the setup process, making it user-friendly for both hobbyists and professionals.
• Versatile Applications: Designed for versatility, this N20 dc gear motor is suitable for a range of applications, including robotics, DIY projects, and small machine. Its adaptability and durability make it a go-to choice for various projects where high rotational power is important.