ANTENNA

This is a 150mm FrSky Receiver Antenna new version IPEX4. This Connector is used to connect the receiver.  the 2.4G control made it unique because it can connect most of the Receivers. This connector has RF113 silver plated wire for that reason this it is good precision machining also it has low loss and high sensitivity.

This is a 15cm 3DBI GSM/GPRS/3G PCB Antenna with IPEX13 Connector. This PCB/Sticker Antenna is a wireless device to receives and transmits signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is a 2.4G 150mm Receiver Antenna regular version IPEX1. This Connector is used to connect the receiver.  the 2.4G control made it unique because it can connect most of the Receivers. The cable length of the connector is 150 mm and  This connector has RF113 silver plated wire for that reason this it is good precision machining also it has low loss and high sensitivity.

This 2.4GHz 3.2dBi RP-SMA female Omni antenna is intended for use for all 2.4GHz applications. The antenna is fitted with an RP-SMA female connector and a blade, made of a flexible material that can be rotated 360 degrees. Suitable for telemetry and WIFI transmissions on lightweight unmanned platforms.

This 2.4GHz 3.2dBi Gain indoor antenna provides high gain and provides tilt and swivel functions for full flexibility.

2.4GHz 5dBi Omni WiFi Booster SMA Male Antenna for Wireless Router. It is Extremely compact low profile housing for minimum visibility and maximum overhead clearance.

The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna. It consists of a springy wire in the shape of a narrow helix, sealed in a rubber or plastic jacket to protect the antenna. Rubber ducky antenna is a form of normal-mode helical antenna.

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna. It consists of a springy wire in the shape of a narrow helix, sealed in a rubber or plastic jacket to protect the antenna.

This is Magnetic Mount Antenna having a frequency of  2400 – 2483 MHz and gain of 3dBi. This is very helpful for signal boosting. Magnetic mount antennas are commonly used for car and truck applications. The antenna’s magnetic base sticks securely to the metal of the vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since magnetic mount antennas require a ground plane, they should be mounted on metal.

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

This is Rubber Duck Antenna with  Right Angle foldable Connector having a frequency of 2400-2483 MHz and 3dBi Gain.

This is PCB Antenna having a frequency of 2400–2483 MHz and  1.8dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is 2400–2500 MHz 3 dBi Sticker Antenna(V2.0).

This is PCB Antenna having a frequency of 2400–2500 MHz and  3dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is Magnetic Mount Antenna having a frequency of 2400 – 2483 MHz and gain of 3dBi. This is very helpful for signal boosting. Magnetic mount antennas are commonly used for car and truck applications. The antenna’s magnetic base sticks securely to the metal of the vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since magnetic mount antennas require a ground plane, they should be mounted on metal.

This is a 433 Mhz 2.5dbi Omnidirectional Folding Antenna gain antenna. The subject of the auction is a set of elements needed to perform the modification of the tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional. These are also the perfect antenna for building custom 3G/4G/LTE Routers using MikroTik and Sierra Wireless cards

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

Head Sucker 433 MHz antenna TX433-XPA100 GSM Antenna comes with a 1-meter feeder cable. The Antenna base equips a magnetic base to make it easy to place your antenna anywhere at your convenience.

The 433MHz spring antenna is an important part of the wireless module. It is widely used in security monitoring, telephone, 3G, RFID, 2.4GHZ, smart water meter, gas, wireless meter reading, industrial remote control, LED screen graphic update, car anti-theft, tire Anti-riot, data transmission and other fields