Shop
XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
In stock
This is XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004. The XBee 2mW Wire Antenna S2C, the latest of its kind in Series 2, offers point to multipoint device connectivity with ease, providing cost-effective wireless solutions for electronic devices. They are interoperable with other feature set devices, including devices from other vendors.
This version (S2C) of XBee Series 2 module utilizes EM357 transceiver. The EM357 transceiver is faster, has the lower current draw, and has significantly more RAM and Flash. These advanced features allow EM357-based modules to support more network traffic, have more memory for code updates, and operate more efficiently.
XBEE PRO SHIELD FOR UNO
In stock
Features :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB 2.0 protocol.
- Bitbang mode ready.
- Easily connected to a PC via mini USB Cable.
- XBee-setting support software X-CTU.
Xbee3 Pro Rpsma
In stock
Next Generation Configuration Platform for Digi XBee
- XCTU is free and compatible with Windows, MacOS and Linux.
- Simple wireless network configuration and architecture.
- Simple development tool for quickly building XBee API frames.
- Explore and read firmware release notes.
XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board
In stock
- Strong TPA3110 chip is a digital power amplifier chip, with low idle loss characteristics, which makes it work well and quickly.
- Onboard, front-facing IC to improve the input sensitivity, high-definition sound quality.
- It can be used for car vehicle computer speaker, family audio and video, and empty square.
- This product has the characteristics of loud sound, the capacitance is large, excellent sound quality.
- There is no solder joint on the back of the circuit board, the chip capacitors, and the solder board together, so there is no possibility of a short circuit.
XH-M131 DC 5V Light Control Switch Photoresistor Relay Module
In stock
This module can be used for light detection, brightness detection, with power indicator light (red) and relay indicator (blue), and with four M3 screw mounting holes, which is convenient to install, the board can adjust the sensitivity of the potentiometer, with relay, to do a variety of brightness detection and control switch, can be used in the street for example at night, during the day to open automatically, automatically extinguished, and other automation equipment.
XH-M542 DC 12-26V 100W TPA3116DA Mono Channel Digital Power Audio Amplifier TPA3116D2 Board
In stock
- Strong TPA3116D2 chip is a digital power amplifier chip, with low idle loss characteristics, makes it work well and quickly.
- Onboard, front-facing IC to improve the input sensitivity, high-definition sound quality.
- It can be used for car vehicle computer speaker, family audio and video, and empty square.
- This product has the characteristics of loud sound, the capacitance is large, , excellent sound quality.
- There is no solder joint on the back of the circuit board, the chip capacitors and the solder board together, so there is no possibility of short circuit.
XH-W3230 temperature controller 220V AC
In stock
Features:
- Mini temperature controller.
- With a clear LED display for better readability.
- Wide temperature measuring range.
- Heating or cooling control.
- All parameters set can be saved after a short circuit.
- Relay output.
- High Control precision 0.1 centigrade
Xl4015 Module
In stock
Features :
- High efficiency up to 96%
- The built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
- Input reverse polarity protection: None (if required, the high current diode in series with the input).
XL4015 MODULE CCCV
In stock
Features
- Short circuit protection: Yes(limited current 8A)
- Over-temperature protection: Yes (automatically turn off the output after over temperature)
- Input reverse connection protection: None, (If necessary, please input a large current diode in the input string)
- Installation method: 4 3mm silk
- Wiring method: terminal block or soldering terminal,
- V-IN is input.
Applications:
- LCD Monitor and LCD TV
- Portable instrument power supply
- Telecom / Networking Equipment
XL6009 DC-DC
In stock
Features :
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Small and Handy voltage regulator module.
XL6009 DC-DC with Display
In stock
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Xrotor 40A ESC for DIY Multicopter Drone
In stock
Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.
The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.
XT-60 Male Connector
In stock
The XT60 connectors are suitable for high power brushless and brushed ESC and motors which are used in RC helicopters, quadcopter, plane, and cars. They ensure high amp connections.
XT-90 MALE/FEMALE CONNECTORS
In stock
XT90 Connector pair with Housing consists of gold plated spring connectors and high-temp Nylon casing. The connectors are inserted into the mold during the production process, which ensures their alignment and durability. The XT90 provides a secure and low-resistance connection for applications that require up to or more than 90A of constant current.
XT60 – male / female connectors
In stock
Nylon XT60 more reliable and a better quality connection than Deans T-Connectors. Nylon XT60 provides better protection from short-circuiting the batteries. These connectors are made from high-temp nylon with gold-plated spring pins or sockets moulded in
XT60 Male Connector With 10CM 14AWG Silicone Wire
In stock
Features :
- High-Quality Connector
- Designed for heavy duty and Long Life
- Compatible for High Power Application
XT60 Male-Female Connector Pair
In stock
XT60 Male-Female Connector Pair for Lipo Battery
This pair of male and female XT60 Connectors is a great alternative to the W.S. Deans T-connector. They are made of high-temp Nylon and gold plated spring connectors, which are integrated into the connector during the injection moulding process. The XT60 ensures a solid and high-amp connection, ideal for applications with up to or more than 65A constant.
Nylon XT60 is more reliable and has a better-quality connection than Deans T-Connectors. Nylon XT60 also offers better protection from short-circuiting the batteries.
Package Includes
- 1 x XT60 Male-Female Connector Pair
xt90S male/female connectors Amass org ( Antispark )
In stock
The XT-90S is based on the XT90, with integration of an anti-spark system that helps to protect against current spikes and premature connector erosion that can lead to ESC failure. The design also provides no chance of incorrect polarity connection.