Shop
TP5100 MODULE
In stock
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
-
Double 8.4v / 4.2v lithium rechargeable single .
-
Programmable charge current. 0. 1A-2A .
-
Programmable steady precharge current 10% -100%.
-
Wide operating voltage, maximum reach I8V.
-
Red and green LED charge status indicator.
-
Chip temperature protection, overcurrent protection, under voltage protection.
-
Battery temperature protection, reverse battery shutdown, short circuit protection.
-
Switching frequency 400Khz, usable inductance 20uH and more.
-
PWR_ON Power battery for switching control.
TPA3110 MONO
In stock
TPA3110 Mono Channel Digital Amplifier Board 30W Power Amplifier Module is useful in applications like DIY Bluetooth speaker, home and car audio system modification.
TPA3116 WITH BLUETOOTH AND REMOTE
In stock
- Audio input: 1. Bluetooth audio reception 2. USB decoding playback 3. TF card decoding Decoding support playback formats: MP3, WMA, WAV, FLAC.
- DC 8-26V input voltage for power supply.Size: 85mm x 52mm.
- The wireless receive distance can be up to 15m(shielded signals). BT 4.0, a perfect BT audio receiver board for use.
TPA3116D2 audio board with volume control
In stock
Applications:
- In robots that speak or generate sounds to indicate activities
- Portable Speakers
- LCD Monitors / TV Projectors
- Arduino or Raspberry Pi Game Machines
- Speaker Phones
TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board
In stock
Build your own music system with 120 watts of stereo output. TPA3116D2 XH-M548 Dual Channel 120W Digital Power Amplifier Board is newly designed digital audio amplifier board with fine quality is practical to install and use also has good performance. It features high-efficiency class D audio power amplifier with the latest and original TPA3116D2 core technology the BTL bridge circuit is more efficient than before.
This product uses the double power supply transformer with a dynamic power supply range from 12V to 24V with high efficiency small quiescent current. Additionally, it is equipped with Perfect protection functions like overvoltage protection and output current limit.
TPA3118PBTL BLUE BOARD
In stock
This TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module comes with very good sound quality. The module equips Mono digital audio power amplifier chip.
It has high output and low power consumption.
TPS61088 CHARGING module 5v 2a USB out / 3-12v input
In stock
- Compatible with multiple fast charge modes
- Automatic identification to adapt to output current
- Support multi-cell battery in parallel
TQFP-0.8MM
In stock
A side for pin pitch size 0.8mm, it can be used for most of the QFP, TQFP, LQFP, FQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm, it can be used for most of the QFP, TQFP, LQFP, FQFP (compatible with 32pin~100pin) to 2.54mm DIP.
Track White Wheel 100×20
In stock
- Light robotics applications
- Remotely Operated Robotic
- Vehicles and Belt/Tank style robot
Track White Wheel 70×20
In stock
Applications:
- Light robotics applications
- Remotely Operated Robotic
- Vehicles and Belt/Tank style robot
Track White Wheel 70×40
In stock
- Light robotics applications
- Remotely Operated Robotic
- Vehicles and Belt/Tank style robot
TS5823 Pro 600mW Video Transmitter Module 5.8GHz 40CH VTX with 5V BEC
In stock
Features :
- Micro-sized and lightweight.
- Perfect for use with small models
- It has transmitter frequency of 5645-5945MHz with 200mW power output
- It features transmitting distance of 1500m in open area.
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter
In stock
This is a high-quality TS832 48Ch 5.8G 600mw Wireless Audio/Video Transmitter for FPV RC transmitter which will give you more than a 5km range in an open, clear area. The unit is upgraded version TS832 32 channel, very easy to install with its plug & play prewired leads and also it has 48 channels in the 5.8G band.
A great little feature is that it has a built-in digital display and a push-button for easy channel selection. This feature also has a memory power off so it will remember the last channel when it is switched off.
TTGO TCall&,PMU ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
In stock
This is a TTGO TCall&, PMU ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered. The Module is a custom ESP32 (ESP-WROVER-B 8MB PSRAM) based development board with an onboard 2G/GPRS Module SIM800L. The USB Type C pluggable board also has an onboard LiPo Battery Charging Circuit & Connector and is a good choice for building IoT applications.
TTP223 Touch Key Module
In stock
The TTP223 is a touchpad detector IC replicating a single tactile button. This touch detection IC is designed for replacing traditional direct button key with diverse pad size.
TTP224 4-way Capacitive Touch Module
In stock
This is a 4 switch digital touch sensor with capacitive sense technology, the TTP 224 IC offers capacitive sense input feed designed for touchpad control, followed by a 4- finger-sized touchpad. The board has a jumper’s arrangement to change the keypress output mode in Timed or Toggle, Active High or Active Low. Separate jumper adjustments are provided for changing the response time of the pressed key: 60mS fast mode or 160mS in Low power. The output side of the board has 6 pin headers, with 4 pins to be connected with the digital I/O of any microcontroller board (Arduino, ARM STM32).
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
In stock
This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. It features 16 sensitive touch pads that make an ideal replacement for the old fashioned keypads.
TURBIDITY SENSOR
In stock
The turbidity sensor module converts the current signal output by the sensor into a voltage signal and performs AD conversion data processing through the single-chip microcomputer. The remodelling module has analogue and digital output interfaces. The analogue quantity can be sampled and processed by the single-chip A/D converter to know the current water pollution. The digital value can be adjusted through the potentiometer on the module to adjust the trigger threshold. When the turbidity reaches the set threshold, the D1 indicator will be lit, the output of the sensor module changes from high level to low level, and the single-chip monitors the change in level To determine whether the turbidity of the water exceeds the standard, so as to warn or link other equipment. The module is inexpensive, easy to use, and has a high measurement accuracy
It can be used to measure the degree of water pollution of products such as washing machines and dishwashers; it can also be used in industrial field control, environmental sewage collection and other occasions that require turbidity detection and control.