Shop
SG90 Mini Servo – 180 degree Rotation
In stock
TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.
Shaft Coupling Motor Aluminum Alloy Boat Model 3D Printer Parts 5 X 8mm
In stock
A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.
Sharp Distance Measuring Sensor unit 10 to 80cm – GP2Y0A21YK0F
In stock
This sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line
SI4432 MODULE
In stock
: Home security alarm and remote keyless entry; Industrial Control; Telemetry Home Automation; Personal data records; Toy Control; Sensor networks; Tire pressure monitoring; Health Monitoring; Wireless PC peripherals; Tag readers.
SIM7670C 4G LM137 with Antenna(GSM 4G Foldable)- ADIY
In stock
This board is centered around the SIMCOM A7670C LTE module and is furnished with an RS232 interface. The RS232 interface allows for effortless connectivity to a computer or laptop using a USB to Serial connector, or to a microcontroller using an RS232 to TTL converter. Additionally, a 3-pin header provides access to a 1.8V level UART interface, enabling direct interfacing with microcontrollers. Communication with the A7670C module is achieved through the utilization of AT commands.
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
In stock
The SIM800A Quad Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS, and data information with low power consumption.
With tiny size of 100 x 53 x 15 mm, it can fit into slim and compact demands of custom design. Featuring and Embedded AT, it allows total cost savings and fast time-to-market for customer applications.
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port
In stock
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
SIM808 Bluetooth Compatible GSM/GPRS/GPS Module
In stock
SIM808 Bluetooth Compatible GSM/GPRS/GPS Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible) is a development board; with SIM808 module which makes you able to use GSM communication and GPS features with your Arduino or Raspberry Pi. With this module, you can send and receive SMS; trace a location and you can even build your own cell phone.SIM808 module on-card functions as GSM communicator and GPS receiver.
The module is 5 – 26V power supply when the power supply is less than 2A the need for 9V This. Direct.
SIM808 GSM GPS Modem
In stock
This GSM-GPS Modem is perfect for projects which require both GSM Modem & GPS Module. SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation.
It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time and convenient for projects that use rechargeable Li-Ion battery.
SIM808 MODEM
In stock
Features :
SIM808 GSM :
- Supports Quad-band 850/900/1800/1900MHz, compatible with all 2G networks all around the world.
- Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port.
- Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone.
- Sending and receiving SMS.
- Sending and receiving GPRS data (TCP/IP, HTTP vb).
- UART communication with automatic baud rate settings.
- GPRS multi-slot class 12/10
- GPRS mobile station class B
- Comply with GSM phase 2/2 +
- Class 4 (2 W @ 850 / 900MHz)
- Class 1 (1 W @ 1800 / 1900MHz)
- Support low power consumption mode: 100mA @ 7V-GSM mode
- Support AT command control (3GPP TS 27.007,27.005 and SIMCOM enhanced AT Commands)
- Supports GPS satellite navigation technology
- Support LED status indicator: Power supply status, network status, and operating modes
- Working environment: -40 ℃ ~ 85 ℃
SIM808 GPS :
- 22 tracking/66 acquisition channel
- GPS L1 C/A code
- Precision: Tracking: -165dBm,
- Cold start: -148dBm
- Finding Location Time(typical): Cold start: 32sn, Hot start: 1sn, Warm start: 5sn
- Accuracy: ~2.5m
Hardware configurations :
- 1 Connect the USB-TTL to the UART interface USB-TTL SIM808
TXD RXD
RXD TXD
GND GND - Insert the valid SIM card to the SIMCARD holder.
- Connect the GPS antenna and GSM antenna to the board.
- Connect the power adapter to the DC044 Interface.
- Change the switch.
- Press the POWKEY button for 2 seconds, the SIM808 module will work and the other 3 LEDs will light.
SIMA7670C 4G/LTE GSM Board (LM39302) V1.1
In stock
The SIM A7670xx 4G LTE Board is a Cat-1 Module which supports wireless communication modes of LTE-TDD/LTE-FDD. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate. This board features a serial interface and is based on the SIMCOM A7670xx LTE modem. The serial interface allows for simple communication with a computer or laptop via a USB to Serial adapter or TTL converter. AT instructions are used to communicate with the A7670xx.
This ADIY SIM A7670xx 4G LTE Board has onboard UART Logic Level Conversion, and Vdd needs to be connected to host reference voltage. It has a UFL connector, which allows connection of any antenna with this board. Apart from this, the module is very compact in size. It can be easily embedded in any customized PCB and it can also be mounted using screws.
This module has sleep mode power consumption of <10mA, allowing the board to be powered by a small Li-ion Battery. LM39302R is used to step down the input voltage, which effectively allows input voltage as low as 9V.
The SIM A7670xx 4G LTE Board supports multiple built-in network protocols like HTTP, HTTPS, FTP, FTPS etc., supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible withSIM7500/SIM7600 series modules.
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH 3A
In stock
This Switch Is An insulated Touch Sensor Switch, It Is Suitable For The LED Which Has Protection Cover Such As Glass, Alec, Plastic, Pottery. You Can Easily Switch On Or Off
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH 5A
In stock
Single Touch Sensor Switch For Glass Lamp Mirror Light LED 12VDC 5A One Colour ON/ OFF is a touch control key switch that is suitable for DC 12V power supply, and realizes the switch control function of LED lights, light tubes and high voltage electrical appliances. It is a product designed specifically for bathroom smart light mirrors. The product is reliable, easy to install, sensitive to touch, and has a large output power. It is suitable for control of various mirror lights and other electrical appliances.
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH E 4A
In stock
Touch Control Sensor Switch for Mirror Light can be powered using a simple 12V DC supply. It realizes the switch control function to light up LED lights from a single touch. The product is specially designed for smart light mirrors. It is suitable for the control of various mirror lights. On powering the 12V DC supply, the backlight of the touch control sensor switch gets started. After that, when you touch the touch sensor, the first led linked to LEDA- begins to glow. When you press the touch sensor again, the second led attached to LEDB-, begins to glow. Now, on touching the first led which is connected to the LEDA- stops glowing.
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router
In stock
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router SH8A – 2Pcs design End Support is used mainly to support Hard Chrome Plated Rods in CNC Routers, CNC Engraving machines, 3D Printing Machines, Cashew Nut Shelling Machines, Pick and Drop Machines, Robots for Industrial Automation.
These reliable products are tested on numerous parameters before dispatching in the market. In order to satisfy the requirements of our precious clients, we customize these products.
These Linear bush end support Linear guide end support Linear shaft end support Hard chrome plated rod end support Chrome plated rod end support Chrome plated rod support Linear shaft support Chrome bar Hard chrome bar.
SKYDROID T10 2.4Ghz 10CH Remote Controller with T10 10-Channel Receiver
In stock
Features:
- Dual Antenna plus dual RF module with integrated control algorithms ensuring reliable communication via full-angle high antenna.
- Integrated with digital video transmission farthest to 10 km.
- Integrated with data transmission, farthest to 20 KM.
- Parameter adjustment via APP with upgraded traditional OSD to touch panel control.
- Connected via Bluetooth or USB, also supports S.BUS, PPM, PWM serial ports, and external devices.
- Using 2 pieces of 18650 batteries (need buy separately), endurance over 20 hours based on 20 DBm transmit frequency.
Package Includes:
1 x SKYDROID T10 2.4Ghz 10CH Remote Controller with Mobile Phone Holder
1 x T10 10-channel Receiver
1 x USB type C Cable
1 x Remote Hanging Strap
1 x Knob Spring Strip
SKYRC Charger PC1500W
In stock
Features:
- Intuitive Operation Interface
Routine charging is made easy by the simple and intuitive interface with the operation procedure simplified. Users only need to select Fast(Fast Charge)/Charge(Slow Charge)/Storage and press the Start button to get the job started. - LCD Display
Real-time charging data at a glance! During the charging process, the display screen displays charging time, battery power percentage, and every single cell’s voltage in real-time. - High Performance with Dual Channels
With high-power and dual channels, two batteries can be charged simultaneously in slow charging mode at a maximum charging power of 1500W. - Compatibility of CAN
PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged. - Better Protection with Conformal Coating
Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work. - Multiple Protection:
- Short Circuit Protection
- Reverse Polarity Protection
- Over-temperature Protection
- Customers can rest assured of our quality safety and reliability