Shop
NEO-M8N GPS Module with Compass for APM
In stock
This is a new generation NEO-M8N High Precision GPS Module with Built-in Compass for APM FC with onboard Compass, low power consumption, and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy, support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or moreAnti-jamming Active CW detection and removal. Extra onboard SAW band passes filter (NEO-M8N/Q). Data logger For position, velocity, and time (NEO-M8N). With a sticker, it is easy and quick to install.
Nextion NX3224K024 2.4inch
In stock
Features:
- Supports built-in RTC
- Supports GPIO
- SD Card interface: support max 32G Micro TF/SD card (FAT32 file format)
- Flash data storage space: 16MB
- EEPROM: 1024 bytes
- RAM: 3584 bytes
- Instruction buffer: 1024 bytes
- Color: 65K (65536) colors
- Resolution: 320×240 pixel
- Adjustable Brightness: 0~180 nit – the interval of adjustment is 1%
NIPPO 9V Battery
In stock
- Constant 9V Output till lasts
- Metal Jacket Body
- Good Built Quality and hence Leakproof
- Easy to install and Replace
- Corrosion-free Connector Point for long-term use
- Environment-friendly
Nokia 5110 LCD Display Module – Blue
In stock
The name of this product itself is enough to explain its origin. Yes of course !!! this LCD module was used in old Nokia 5110/3310 cell phones. Now it’s been widely used by hobbyists for graphics, text, etc.
Though it’s an industrial module, this LCD display is extremely easy to use. The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended as a cell phone screen.
This Nokia 5110 LCD Module is mounted on an easy-to-solder PCB. The Nokia 5110 LCD Module uses a Philips PCD8544 LCD driver, which is designed for mobile phones.
NRF24L01 2.4GHz Wireless Transceiver Module
In stock
This is M177 NRF24L01 2.4GHz Antenna Wireless transciever Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range
NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
In stock
This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module comes with the 2.4G antenna (2DB), with a 250Kbps transmission rate on open-air it can reach the 800-1K meters communication distance.
NTC 10D20
In stock
This thermistor can facilitate your daily temperature measurement and is widely used in electrical equipment, household appliances, air conditioning equipment, control motors, electric water heaters, heaters, bulb regulators, etc.
NTC Module
In stock
NTC Thermistor temperature sensor module is low cost, small size module. It is very sensitive to ambient temperature. It is generally used to detect the temperature of the surrounding environment. Through potentiometer adjustment, it is possible to change the temperature detection threshold.
DO output can be directly connected to the microcontroller to detect high and low, by detecting temperature changes in the environment. The temperature detection range of the module is between 20 and 80 degrees Celsius. This module can be replaced with a line temperature sensor for controlling the water temperature, water tank, etc.
Generally, the 4 wire method of thermistor measurement is the most accurate because there is effectively no current flowing in either of the measurement cable wires and therefore no added resistance due to the cable wires.
NUCLEO-F103RB – STM32 Nucleo-64 STM32F103RB Development Board
In stock
STM Nucleo- F103RB board is a Medium-density high performance full scale evaluation platformsupported with ARM32-bit MCU and 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 communication interfaces. STM32 Nucleo is an ideal solution for low cost development platform in LQFP64 package.
The board offers two types of extension resources Arduino Uno V3 connectivity and ST morpho extension pin headers for full access to all STM32 I/O s with ARM mbed enabled for the support of online tools providing open source development platform. The STM32 Nucleo boards integrate an ST-Link debugger/programmer with separate selection-mode switch which enable the board to be used as a standalone ST-LINK/V2-1.
STM32 Nucleo boards can be used with wide range of development environments including IAR EWARM, Keil MDK-ARM, mbed and GCC/LLVM-based IDEs and finds integrated solution for the automation and control devices like PLC, HVAC, handheld equipment.
NUCLEO-L552ZE-Q – STM32 Nucleo-144 STM32L552ZE Board, SMPS Arduino ST Zio/Morpho Connectivity
In stock
The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode.
The ST Zio connector, which extends the ARDUINO Uno V3 connectivity, and the ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-144 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.
Nvidia Jetson Nano 4GB
In stock
Jetson Nano developer kit is now updated with B01 carrier board that adds an extra MIPI CSI connector and other few changes, including compatibility with NVIDIA Jetson Nano production module (with eMMC flash instead of MicroSD card)
Other changes include the removal of the button and serial headers, and the power select header (J48) has been moved to the edge of the board. The new baseboard is also said to be compatible with the upcoming Jetson Xavier NX module, but according to a forum thread using an A02 module with a B01 carrier board will not work.
OEN 58-12-2C 5A Relay
In stock
It’s a OEN 58-12-2C 5A Relay. It’s a electrically operated switch and it consists of set of input terminal for a single or multiple control signals, and a set of operating contact terminal. Relay are used where it is necessary to control a circuit by an independent low power signal or where several circuit must be controlled by one signal.
OLED 1.3INCH BLUE
In stock
This is a 1.3 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header pre-soldered to board.
OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
OMNI WHEELS
In stock
- 360-degree maneuverability
- Simple & stable mounting options
- Robust and durable construction
- Fits other Arduino motors with the hub included
- Easier directional control and tracking
- Low Maintenance
OpenPilot CC3D EVO Flight Controller with Side Pins
In stock
Are you want to be an Electronic Geek in the future and going to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand.
This OpenPilot CC3D EVO Flight Controller Side Pin card has a smooth feature that makes it directly compatible with satellite receivers without the need for any additional cables. It also supports S.BUS. Evo is equipped with a powerful 32-bit STM32 processor with 128kb Flash and 20kb RAM. The 3-axis MEMs technology is used for both gyro and accelerometer.
Orange 11.1V 3300mAh 35C 3S Lithium Polymer Battery Pack
In stock
Pro-range 3S 35C/80C Lithium polymer 3300mah battery Pack (LiPo) is known for its performance, reliability, and price. So it’s no surprise to us that the Pro-range lipo battery is useful in drones or any other multirotor systems; likewise, health & fitness devices. The 3300mAh battery Pack (LiPo) delivers full capacity at a price everyone can afford; likewise, we assure a quality product and the best customer support.
The Pro-range 3S 35C/80C 3300mAh battery Pack (LiPo) is available with heavy-duty discharge leads; above all, it minimizes resistance and sustains high current loads. Pro-range batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is available with plating of gold on connectors and JST-XH style balance connectors. The assembling of all Pro-range Lithium Polymer battery packs is done using IR match cells, in addition, to provide high reliability.
Meanwhile, You would not get a better deal on lithium batteries anywhere in India.
Orange OT5320M 7.4V 20kg.cm 180° Copper Metal Gear Digital Servo Motor
In stock
The Orange OT5320M 7.4V 20kg.cm 180° Copper Metal Gear Digital Servo Motor works with any servo code, library, and hardware. It rotates approximately 120-degree, 60 degrees in each direction. This motor package comes with a selection of hardware and arms.
Original JHD 16×2 Character LCD Display With Blue Backlight
In stock
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a Original JHD 16×2 Character LCD Display With Blue Backlight as there are many fake JHD Displays in the Market.
This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers. This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project.