Shop
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
In stock
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A) is essentially a ramped-up version of our Ardumoto motor driver shield. For this Monster Moto Shield, we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
In stock
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A) is essentially a ramped-up version of our Ardumoto motor driver shield. For this Monster Moto Shield, we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
MOTION SENSOR SWITCH (220V/200W) PIR ”806B”
In stock
Application:-
- Industrial Automaton Control
- Floodlights, panel lights, ceiling lamps, LED illumination, etc.
- Automatic doors, Security systems
- It is suitable for indoor use in various spaces
- Easy installation
- Lightweight
- High quality
- High safety performance
- Small and compact design
- Easy installation
- stable performance and energy savings
MOTION SENSOR SWITCH (220V/200W) MINI ”S82A”
In stock
- Can switch on the load automatically after detecting the human motion for energy saving
- Can switch on the load automatically after detecting the human motion
- Adjustable Ambient light modes: Deep dark, light dark, all day.
MOTION SENSOR SWITCH 220V/200W ROUND
In stock
- Adjust the light to soft and stable, with no flickering.
- You can conveniently let the light auto on/off. The switch can detect the human body’s infrared, and use infrared to control the load.
- Users according to actual needs, the human body sensors installed in the appropriate environment.
- Applications: energy-saving lamps, LED lamps, fluorescent lamps, and other kinds of loads.
- Easy to install and simple to use.
MOTION SENSOR SWITCH MICROWAVE 15MT
In stock
Specifications:
- Human Detection
- Energy Saving Switch
- Detection through doors, panes of glass, thin walls.
- It can identify Day & Night.
- Good Sensitivity Detector
- Detecting Angle: 360/180 Degree
- Convenience Safety
- Saving Energy & Practical Functions
Applications:
Used in Home, Office, Shops, Hospital, Bathrooms, Corridors, Step & Parking Area.
MOTION SENSOR SWITCH MICROWAVE BASED
In stock
Durable, more accurate in high temperature or normal temp than PIR sensors, quick response timer, Detect outside glass or thin surface.
Now Switch ON/OFF your Lights, Bulb,CFL, etc
by AUTOMATIC
Use INFRARED PIR MOTION SENSOR
Life: More than 5 years
Use:
Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc
MP3-TF-16P MP3 SD Card Module with Serial Port
In stock
- Supports sampling rates (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB.
- Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes of NOR FLASH.
- A variety of control modes are available. IO control mode, serial mode, AD key control mode.
- The broadcast language spots feature, you can pause the background music being played. Advertising finished playing back background sound to continue playing.
- The audio data is sorted by folder, supports up to 100 folders, folders can assign every 255 Tracks
7,30 level adjustable volume, adjustable EQ 6.
MPPT SOLAR CHARGE CONTROLLER CIRCUIT
In stock
The output of the Solar Charger is intended to charge a single polymer lithium-ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
MPR 121 Capacitive Touch Module
In stock
This MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode The MPR121 also features eight LED driving… pins, when these pins are not configured as electrodes, they may be used to drive LEDs. There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to the ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL, and the interrupt pin to 10k pull-up resistors. If you do not require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
MPU-6050
In stock
The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech. The MPU6050 datasheet is available in the attachment section to get this visit.
There are different types of magnetometer are available the basic differences between MPU6000, MPU6050 and MPU6500 is:
| MPU6000 | MPU6050 | MPU6500 |
| 1. A sampling rate of 8 kHz. | 1. A sampling rate of 8 kHz. | 1. A sampling rate of 32 kHz. |
| 2. Supports SPI and I2C interface. But I2C is too slow to handle 8 kHz gyro update. | 2. Supports I2C interface communication protocol. | 2. Supports both I2C and SPI interface. |
| 3. Vibration Sensitivity is better than MPU6500. | 3. Vibration Sensitivity is better than MPU6500 but the speed of operation is less than MPU6000. | 3. It is more susceptible to vibrations, so the need for some vibration isolation methods.
It is faster than both MPU. |
The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms. To get more insights about specifications visit the MPU6050 datasheet.
MQ 135
In stock
This is a MQ 135 Air Quality/Gas Detector Sensor Module For Arduino.
If you are want to make a device that is used to detect Ammonia, Sulphide, and Benzene steam, also sensitive to smoke and other harmful gasses from the desired distance, then this sensor is needed for you.y0u can buy this sensor from Robu.in at a reasonable price.
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising.
Convert the change of conductivity to the corresponding output signal of gas concentration. The MQ135 gas sensor has a high sensitivity to Ammonia, Sulphide, and Benzene steam, also sensitive to smoke and other harmful gases.
MQ-136
In stock
MQ-136-Hydrogen Sulfide Gas Sensor can be used to monitor the concentration of Hydrogen Sulfide gas. This Module simplifies using the MQ-136 gas sensor by providing digital as well as analog output which can be interfaced to Microcontrollers, Arduino, and Raspberry pi.
The sensitive material of the MQ136 gas sensor is SnO2, which with lower conductivity in clean air. When the target Hydrogen sulfide gas exists, the sensor’s conductivity is higher along with the Hydrogen sulfide concentration rising. Please use a simple electric circuit, Convert the change of conductivity to correspond output signal of gas concentration. MQ136 gas sensor has a high sensitivity to Hydrogen sulfide, Low sensitivity for other combustible gas. It is at a low cost and suitable for different applications.
MQ-137
In stock
The MQ137 sensor is a gas sensor module is specially designed to detect and sense gases like ammonia (NH3) and carbon monoxide (CO). The MQ137 gas sensor module comes with digital pins that can be connected to a microcontroller like Arduino boards and come in handy when you are only trying to detect one particular gas.
Applications of MQ137 Gas Sensor
- Detector measure Gases like NH3 or CO
- Air quality monitor
- Gas leak alarm
- Safety standard maintenance
- Maintaining environmental standards in hospitals
MQ-3
In stock
It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output.
The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes a common breathalyzer.
The digital output can be easily interfaced to microcontrollers and other circuits. The analog output can be hooked up to an ADC of a microcontroller to get a wide range of sensor readings.
MQ-4
In stock
If you want to detect methane gases with your projects, you will need sensors. If you need any data on the sensitive material then, the MQ-4 High Sensitivity Gas Methane (CNG) Detector Gas Sensor Module is a quite good solution.
It provides an analog output corresponding to the concentration of the gases in the air and an easy-to-use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm.
Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
MQ-5
In stock
The MQ5 ( MQ-5 ) is used in gas leakage detecting equipment in consumer and industry applications, this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer.
The sensitive material of the MQ-5 gas sensor is tin Oxide (SnO2), which with lower conductivity in clean air. When the target combustible gas exists, The sensor’s conductivity is higher along with the gas concentration rising. Please use a simple electro circuit, Convert the change of conductivity to the corresponding output signal of gas concentration.
MQ-5 gas sensor has a high sensitivity to Methane, Propane, and Butane, and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible gas especially Methane, it is with low cost and suitable for different application
MQ-6
In stock
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module is a great way to add basic gas sensing to your project at a reasonable price. TheMQ-5 Methane LPG Liquid Propane Gas Sensor Module particulate sensor uses a Buzzer to sense any detected material that is even present in the air!
This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. The MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module particulate sensor uses a Potentiometer to change the detection range of the sensor!
This sensor has high sensitivity and a fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple, all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.