Shop
Max30102 Black Org
In stock
Main Applications:
- Medical Monitoring Devices
- Fitness Assistant Devices
- Wearable Devices
- Detection signal type: light reflection signal (PPG)
- Output signal interface: I2C interface
MAX30205 Module
In stock
MAX30205 is the new chip from Maxim which provides accurate human body temperature readings with an accuracy of 0.1 °C
This is a digital I2C temperature sensor, so an ADC would not be required to read this sensor. It also provides an over-temperature alarm as an interrupt to drive microcontroller interrupt lines.
Applications: Fitness, Medical
max3232 mini rs232 to ttl module
In stock
Features:
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
- Optional onboard PSU for internal/external use for a quick start out of the box.
- Power can be routed to pin 9 (if required) on the RS232 connector – useful for specific
applications.
MAX4466 for Arduino
In stock
This MAX4466 Electret Microphone Amplifier with Adjustable Gain Module is best used for projects such as voice changes; audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x.
MAX485 TTL To RS485
In stock
This converter lets you send and receive data using the RS485 network from your Arduino/microcontroller. Similar to Serial TTL and RS232 interfaces, the RS485 lets you transfer data between microcontrollers and devices but with extra features! RS485 is an industry standard protocol for data transfer and provides numerous advantages.
MAX6675
In stock
It has a 12-bit resolution providing temperature readings from 0°C to 1024°C (max temperature of the supplied sensor is 450°C) with a resolution of 0.25°C.
MAX9814 High Performance Microphone AGC Amplifier Module
In stock
The MAX9814 High-Performance Microphone AGC Amplifier, model CMA-4544PF-W, is an advanced audio solution that excels in capturing and amplifying sound with exceptional clarity. Featuring an Automatic Gain Control (AGC) system, it dynamically adjusts the amplification level to accommodate varying audio input levels, ensuring consistent and high-quality output. The compact module is equipped with the MAX9814 amplifier chip, known for its precision and reliability. With a user-friendly design, it’s suitable for diverse applications, from voice recording to audio surveillance. The CMA-4544PF-W offers a reliable, compact, and efficient solution for integrating superior audio performance into electronic projects and devices.
MAX98357 I2S 3W Class D Amplifier Audio Decoder Module
In stock
Features:
- Model: MAX98357
- 3.2W Output Power at 4Ω
- Five pin-selectable gains: 3dB, 6dB, 9dB, 12dB, 15dB
- click-and-pop suppression
- Thermal shutdown protection
- Supports Left, Right, or (Left/2 + Right/2) Output
MB10S SMD
In stock
MB10S Bridge Rectifier is a 0.5 A rectifier family that achieves high surge current absorption within a very small foot print of SOIC-4. Within its small 35 mm2 form factor, the MB family shines in its surge capability. In order to absorb high surge currents, the design supports a 35 A IFSM rating and a 5.0 A² Sec I²T rating. The MB10S Bridge Rectifier is also rated to breakdown voltages of up to 1000 V. These features makes it ideal for small power supplies that need a little extra surge capability.
MB20 – 20mm Average PCB Mounting CT
In stock
- Simple Compatible
- Frequency response is good
- Size is small
- Energy consumption is low
- The range of voltage usage is large
MB27A – 27mm Average Continuous buzzer
In stock
- This is an 27mm Average continuos Buzzer.
- It has a operation voltage of 1.5 to 27vdc.
- Frequency response is good
- Energy consumption is less
- The range of Voltage usage is large
- Size is small and is simp;y compactible with other microcontrollers like Arduino and Nord Mcu
MB35L2 – 35mm Loud Intermittent
In stock
A buzzer is a small yet efficient component to add sound features to our project/system. It is very small and compact 2-pin structure hence can be easily used on breadboard, Perf Board and even on PCBs which makes this a widely used component in most electronic applications.
MCP2515 CAN Module
In stock
This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will find easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects.
MCP4725 MODULE
In stock
With CJMCU MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is an I2C controlled Digital-to-Analog converter (DAC). A very cost-efficient option of DAC allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other creative projects!Additionally, the module has onboard SCL, SDA, VCC, and another GND for your basic I2C pinout. The pull-up resistors on this board can be disabled just check the Hookup Guide in the Documents section below for instructions and tips on doing this.
MCU-758 ACS758LCB-050B- PFF-T Hall Current Sensor Module
In stock
Meanwell LRS 350w-12v
In stock
Features:
- Provides efficient and stable power delivery.
- The space-saving form factor for easy installation.
- Includes over-voltage, over-current, and short-circuit protections for device safety.
- Compatible with a wide range of input voltages.
- Built with high-quality components for long-term reliability.
- Suitable for various industrial and commercial applications.
- Meets safety and quality standards for peace of mind.
Meanwell LRS15-5
In stock
Typical Applications
•Industrial automation & control machinery
•Mechanical & electrical equipment.
•Household appliances.
Meanwell SMPS 25-5 5V5A
In stock
It works efficiently and is only low heat. Its output of constant voltage ensures the stability of the power supply. The switching power supply is provided with protection against over-voltage, short circuit and overload. The anti-interference function guaranteed a long lifetime for the LED lamps. Switching power supply products are widely used in: industrial automation control, military industry equipment, scientific research equipment, security, monitoring, entrance guard, building intercom, LED lighting, advertising lights, industrial control equipment etc.