Shop
MAGNET 8X3 SILVER
In stock
Applications of Neodymium Magnet:-
- Acoustic field: the speaker, receiver, microphone, alarm, stage audio, car audio and so on.
- Electronics: permanent magnetic actuator vacuum circuit breakers, magnetic relays,meter sound meter, a reed switch, sensors.
- Electrical field: VCM, CD / DVD-ROM, generators, motors, servo motors, micro-motors, motors,vibration motors.
- Machinery and equipment: magnetic separation, magnetic crane, magnetic machinery.
- Healthcare: MRI scanners, medical equipment, magnetic health products and so on.
- Other industries: magnetized Wax, pipe descaling, magnetic fixture, automatic mahjong machine, magnetic locks, doors and for windows magnetic, magnetic luggage, leather magnetic toys, magnetic tools, gifts and packaging.
MAGNET RING 36X8 BLACK
In stock
Features:-
- It has the advantages of good anti-demagnetization and low cost.
- It is produced by powder metallurgy method, with low remanence and low return magnetic permeability. It has large coercive force.
- The material is hard and brittle.
- The main raw material is oxide, so it is not easy to corrode. Working temperature: -40 ℃ to + 250 ℃.
- Isotropic sintered ferrite permanent magnetic materials have weak magnetic properties, but can be magnetized in different directions;
- Anisotropic sintered ferrite permanent magnetic materials have strong magnetic properties, but can only be magnetized in a predetermined direction.
Magnetic Door Open Sensor – N/C Type
In stock
A Magnetic Contact is an electrically controlled switch used for switching a power circuit, similar to a relay. Magnetic contacts give exact position of the door (open/close).
Magnetic Reed Switch
In stock
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
Magnetic Switch Round Type
In stock
Features :
- Easy to install
- Strong concealment
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartment, hotel, office, etc.
- Designed to do embedded in the door or window frame.
Maix BIT RISC-V AI+IOT K210 Board
In stock
MAix’s Advantage and Usage Scenarios:
- MAIX is not only hardware, but also provide an end-to-end, hardware + software infrastructure for facilitating the deployment of customers’ AI-based solutions.
- Thanks to its performance, small footprint, low power, and low cost, MAIX enables the broad deployment of high-quality AI at the edge.
- MAIX isn’t just a hardware solution, it combines custom hardware, open software, and state-of-the-art AI algorithms to provide high-quality, easy to deploy AI solutions for the edge.
- MAIX can be used for a growing number of industrial use-cases such as predictive maintenance, anomaly detection, machine vision, robotics, voice recognition, and many more. It can be used in manufacturing, on-premise, healthcare, retail, smart spaces, transportation, etc.Features
- It is twice of M1 size, 1×2 inch size, breadboard-friendly, and also SMT-able
- It integrate USB2UART chip, auto download circuit, RGB LED, DVP Camera FPC connector(support small FPC camera and standard M12 camera), MCU LCD FPC connector(support our 2.4 inch QVGA LCD), TF card solt.
- MAix BiT is able to adjust core voltage! you can adjust from 0.8V~1.2V, overclock to 800MHz!
Male to Female Jumper Wires 40Pcs 20cm
In stock
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Male To Male Jumper Wires 40 Pcs 10cm
In stock
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Male to Male Jumper Wires 40 Pin 30cm
In stock
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
MARIO 40 WATT HOT MELT PROFESSIONAL GLUE GUN
In stock
- Rapid heating within 3-5 minutes.
- Compact and solid body made of 100% fresh heat resistant plastics.
- Built in fuse will break the over current to prevent over heating and burning.
- 50 % electricity will be saved with high efficiency and constant temperature.
- Long service life
Mark4 13inch V2 Carbon Fiber for FPV Racing Drone Quadcopter Freestyle Frame Kit
In stock
The MARK4 V3 13-inch 570mm Carbon Fiber Frame Kit is a high-performance and durable frame designed for large-format FPV freestyle and long-range drone builds. Crafted from premium 3K carbon fiber, the frame offers exceptional rigidity and strength while maintaining a lightweight structure, ensuring optimal flight stability and agility even under high-thrust conditions.
Mark4 225mm 5Inch Carbon Fiber Quad Frame For FPV Drone
In stock
The Mark4 225mm 5-Inch Carbon Fiber Quad Frame is a lightweight and durable frame designed to provide a stable and agile platform for your FPV drone. It is engineered to withstand the rigors of FPV flying, including high-speed racing and acrobatic maneuvers, while also offering customization options for different components.
Mark4 V2 7inch 295mm T6 Carbon Fiber Frame Kit without 3DP
In stock
Elevate Your FPV Racing Experience with the Mark4 V2 7-Inch Carbon Fiber Frame: Build your ultimate freestyle quadcopter with unmatched durability and precision.
The Mark4 V2 7-Inch 295mm T6 Carbon Fiber Frame is engineered for FPV freestyle and racing enthusiasts who demand both agility and strength. Designed with an X-Type structure and premium 3K carbon fiber, this frame kit provides excellent flight stability and is built to withstand the most challenging conditions. Its 6mm thick arms and robust frame design offer durability without compromising on performance. Perfect for pilots who need a frame that is both lightweight and strong, the Mark4 V2 is optimized for smooth flight and sharp maneuvers.
Mark4V2 – 10 Inch Frame
In stock
The Mark4 V2 10-inch carbon fiber FPV drone frame is a popular platform for long-range and heavy-lift FPV applications, where structural strength, vibration control, and dimensional accuracy are critical. Designed to support larger propellers and higher payloads, the 10-inch Mark4 V2 configuration requires higher manufacturing precision compared to smaller FPV frames.
MASTECH M3900
In stock
This meter is a compact, rugged, battery operated, handheld 3.5 inch LCD Display
MASTECH MA830L
In stock
- Pocket Size and 2000 counts LCD Display
- Tests AC/DC Voltage, DC Current and Resistance
- Transistor Check, Diode and Continuity Test
- Display Back Light
- Data Hold
- Audible continuity
- Transistor HFE test
- Low battery indication
- Rubber hostler for good grip.
Mastech MY60
In stock
- DC Voltage Range : 1000V
- Environment temperature and humidity : 0-40 °C (<80% RH, <10°C, it is not to be considered).
- Storage temperature and humidity : 0-60 °C (<70% RH, remove the battery).
- Temperature coefficient: 0.1 Accuracy/°C (<18°C or >28°C).
- AC Voltage Range : 750V
- Resistance : 200MΩ
- Power Supply : 1x9V 6F22 Battery
- Product Size : 195mmx95mmx55mm
- Product Weight : 366gm