Shop
LST-S2 AIO 5.8G 40CH 25mW VTL 800TVL Camera Integrated Transmitte
In stock
Button Function
Short press ( 1 sec or less ): change channels 1 – 8
Long press ( 1.5 sec ): change bands A – B – E – F – R
Long press ( 3 sec ): change NTSC/PAL system
Blue LED on = NTSC, blue LED off = PAL
LST-S2 AIO 5.8G 40CH 25mW VTL 800TVL Camera Integrated Transmitte
In stock
Benefits:
- Small and lightweight
- Easy to use
- High-quality image and video
- Compatible with a wide range of FPV drones
- Affordable
If you are looking for a small, lightweight, and easy-to-use FPV camera, then the Mini AIO FPV Camera is a great option. It is compatible with a wide range of FPV drones and is very easy to install.
LWC- GSM-SCREW – 06 Screw Base Mount Antenna
In stock
This is Screw Base Dual-Band Mount Antenna having a frequency of 824 – 960 MHz & 1710 – 2170 MHz and gain of 4/6 dBi. This antenna is supported to GSM FCT and other GSM Module/Modems. The biggest advantage to dual-band antennas is their ability to provide a strong, stable wireless connection is often difficult to reach locations. For this reason, they are often used in devices such as cellular or dual-band wireless access points.
LWC-2400-HELIX-TIN-RA-HSS-045 Helical Antenna
In stock
A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of 2400 – 2483 MHz with a gain of 1.5dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.
Lwc-2400-rd-ra-rpsma-plug-05
In stock
This is Rubber Duck Antenna with Right Angle fold-able Connector having a frequency of 2400 MHz and 3dBi Gain,
LWC-4G-SCREW-06 GSM 4G/3G/2G LTE Flexible Screw Base Mount Antenna
In stock
This is LWC-4G-SCREW-06 GSM 4G/3G/2G LTE Flexible Screw Base Mount Antenna having Frequency of 698 – 960 MHz & 1710 – 2690 MHz and 6/ 7 dBi Gain. This antenna is supported to GSM FCT of Micromax, and other GSM Module/Modems. Screw mount antennas are commonly used for car and truck applications. The antenna’s Screw base can be fitted permanently to any metal surface and direction with the screw provided at the base of the antenna vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since Screw mount antennas require a ground plane, they should be mounted on metal.
LWC-CA-SMA-JACK-BH-ST-UFL-1.13mm RF Cable Assemblies-15cm
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
LWC-CA-SMA-JACK-BH-ST-UFL-1.13mm RF Cable Assemblies-30cm
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna.
LWC-GPS-PASSIVE-CP-03 (V1.0,UFL) Patch Antenna
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
LWC-GSM-HELIX-RA-01 Dual Band Helix Antenna
In stock
A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of 824 – 960 MHz & 1710 – 2170 MHz with a gain of 1 dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.
M266 CLAMP MULTIMETER
In stock
- Display 2000 counts
- AC current measurement
- Data Hold
- Reliable and accurate
- Ideal for electrical troubleshooting
- Low Battery Display
M3 X 10mm Female-Female Brass Hex Threaded Pillar Standoff Spacer
In stock
The Brass Hex Threaded Pillar Standoff Spacer Range are versatile standoffs designed to securely mount your PCB as well as elevating it from other components such as the inside of a computer chassis, Quadcopter frames, Motor Driver Body or any other PCBs come in your DIY Projects. They are also ideal for improving airflow space around components when the equipment becomes hot. These standoffs are available in a range of different heights and threads sizes to suit a wide range of PCB applications
Male Female Threaded Hex Standoff Pillar PCB Board Spacing Screw is of high-quality brass, anti-corrosion, and anti-rust, durable to use. Usage threaded hexagonal column stand-off support, easy to install for segregating board.
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.3mm
In stock
Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm
In stock
Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.5mm
In stock
Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
MA860H STEPPER DRIVER
In stock
It is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors(from “NEMA 17” or “NEMA 34” size)with less noise and heat. And it can provide better performances at high speed than most of the drivers in the markets.
MAGNET 30x20x6 BLACK
In stock
Features:-
- It has the advantages of good anti-demagnetization and low cost.
- It is produced by powder metallurgy method, with low remanence and low return magnetic permeability. It has large coercive force.
- The material is hard and brittle.
- The main raw material is oxide, so it is not easy to corrode. Working temperature: -40 ℃ to + 250 ℃.
- Isotropic sintered ferrite permanent magnetic materials have weak magnetic properties, but can be magnetized in different directions;
- Anisotropic sintered ferrite permanent magnetic materials have strong magnetic properties, but can only be magnetized in a predetermined direction.
MAGNET 40X20X6 BLACK BAR
In stock