Shop
HDMI to VGA Converter with Audio
In stock
HDMI male to VGA Female Converter, with 3.5 mm Audio Out converts digital HDMI signal into analog VGA video. This converter module has integrated audio output and it is powered via an HDMI connector, therefore this HDMI Male to VGA Female Adapter requires no external power. Ideal for use with Raspberry Pi, all models of Raspberry Pi features an HDMI port for display connectivity. However at times, we may need to interface an old VGA display with Raspberry Pi, such times can be dealt with our HDMI Male to VGA Female Adapter.
HDMI TO VGA WITH AUDIO
In stock
- Support HD resolution, super clear picture, fast transmission speed
- The maximum signal range up to 1920 X 1200, 1080p;
- Video input signal: 5Volts p-p(TTL) ;
- Support VGA video bandwidth: 10 bit, 162MHz
- Video amplifier bandwidth: 162MHz
- Support resolution up to 1920 X 1200, reduce blank signal during transmit.
- No external power supply, plug, and play.
Heart Rate Monitor Kit with AD8232 ECG sensor module
In stock
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.
ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily. The ECG module AD8232 heart ECG monitoring sensor module is an integrated signal conditioning block for ECG and other bio-potential measurement applications.
The ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino is designed to extract, amplify, and filter small bio-potential signals in the presence of noisy conditions; such as those created by motion or remote electrode placement.
The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors too. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board.
Heatsink 100x69x36MM Silver
In stock
Specifications:
Material: Aluminum
Tooth Number: 23
Size: 100 x 69 x 36mm / 3.93 x 2.71 x 1.41″
Quantity: 1
Weight: 223g(approx.)
HEATSINK 45 X 45 X 18
In stock
Features:
- Prevents overheating of board
- Absorbs heat quickly
- Fast cooling
- Quantity of blade: 11
- Material: Aluminum
- Colour: Silver
Helix Antenna 433Mhz
In stock
A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. One of the main reasons to use a helix antenna is its low cost and compact size.
Helix Antenna 868MHz
In stock
A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of 865MHz to 868MHz with a gain of 1.5dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.
Here3 GPS with iStand
In stock
Receiver Type: u-blox M8 high precision GNSS modules (M8P)
Satellite Constellation: GPS L1C/A, GLONASS L1OF, BeiDou B1I
Positioning accuracy: 3D FIX: 2.5 m / RTK: 0.025 m
Dimension: 76mm x 76mm x 16.6mm
Operating Temperature: -40℃ to 85℃
Navigation Update Rate : Max: 8Hz
Communication Protocol: CAN
Processor: STM32F302
IMU sensor: ICM20948
Weight: 48.8g
Herewin 14S Smart 20000mAh Battery
In stock
Herewin 14S 20000mAh 53.2V Smart LiPo Battery, engineered for high-performance UAVs, agricultural drones, and industrial-grade lifting systems. With advanced BMS protection, long cycle life, and rapid charging capabilities, this smart battery delivers reliable power with precision and safety. Ideal for demanding environments where endurance and efficiency matter most
Herewin 22.2V 22000mAh 25C 6S Lithium Polymer Battery
In stock
- High Capacity: Available in 12000mAh, 16000mAh, and 22000mAh options, offering extended flight times and higher energy density.
- Powerful Performance: Delivers substantial power with capacities of up to 488.4Wh, ensuring reliable and long-lasting energy for UAVs and other high-demand applications.
- High Discharge Rate: Discharge rates of 20C for 12000mAh & 16000mAh, and 25C for the 22000mAh model, providing rapid power release for demanding drone operations.
- Max Charge Current: Supports fast charging with up to 2C, ensuring quicker turnaround times for battery recharges.
- Wide Temperature Range: Operates efficiently between 0°C to 40°C, suitable for various environments and weather conditions.
- Safety and Durability: Includes high industry standards for safety, cycle life, and resistance to swelling, making it a reliable and long-lasting solution.
- Versatile Use: Ideal for UAVs, remote control cars, boats, and planes, catering to high-capacity and long runtime needs across different applications.
HEX Here4 Multiband RTK GNSS GPS Module
In stock
- GNSS module: NEO-F9P
- Processor: STM32H757
- IMU sensor: ICM42688+RM3100
- Barometer: MS5611
- Communication Protocol: DroneCAN 8Mbit/s
Hex Pixhawk Cube+ Flight Controller Autopilot
In stock
- Processor
- 32bit ARM® STM32H753 Cortex®-M7（with DP-FPU; Cube Orange+ uses ARM® STM32H757
- 400 Mhz/1 MB RAM/2 MB Flash
- 32 bit STM32F103 failsafe co-processor
- Sensors
- Three redundant IMUs (Accelerometers/Gyroscopes), Two Barometers, One Magnetometer
- All sensors connected via SPI.
- ICM 20649 integrated accelerometer / gyro, MS5611 barometer on base board
CubeOrange: – InvenSense ICM20602 IMU,ICM20948 IMU/MAG, MS5611 barometer on temperature controlled, vibration isolated board
CubeOrange+: – Invensense ICM42688 IMU, ICM20948 IMU/MAG, MS5611 barometer on temperature controlled, vibration isolated board
- AK099916 MAG
HG7881 4-Channel DC 2.4-10V Motor Driver Broad
In stock
This HG7881 4-Channel dc motor driver module comes with its own four L9110S chip. It can drive 4 DC or Can drive two 4-wire 2-phase stepping motor.
HGLRC M80 Pro GPS Module
In stock
The HGLRC M80 Pro GPS Module is a compact and lightweight GPS receiver designed for FPV racing drones and other small UAVs. It offers reliable positioning and orientation capabilities, making it suitable for various drone applications.
HIGH POWER ROBOT SMART CAR MOTOR DRIVER BTS
In stock
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.
HM 11 Bluetooth Module
In stock