Shop
ESP32 EYE Org AI Board
In stock
ESP-EYE supports firmware downloading with a PC loaded with Linux, MacOs or Windows operating systems. For now, users must set up toolchain in the development environment before starting the software development.
As raised on Reddit by some users, whether “Face detection is done on board or images are streamed to open CV somewhere,” ESP-EYE definitely do the face detection on board. The ESP-EYE is going to open up new applications for newer and existing projects in the areas of computer vision, imagine what you can do with hacking an Arduino to work together with the ESP-EYE. You can create a low-cost AI project. I need to get my hands on one now!
ESP32-A3 development board with 1.28inch round touch lcd
In stock
Features:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 4MB of onboard Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
ESP32-WROOM-32E 4M
In stock
Features:
- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- WiFi
•802.11b/g/n
• Bit rate: 802.11n up to 150 Mbps
• A-MPDU and A-MSDU aggregation
• 0.4 µs guard interval support
• Center frequency range of operating channel: 2412 ~ 2484 MHz - Bluetooth®
• Bluetooth V4.2 BR/EDR and Bluetooth LE specification
• Class-1, class-2 and class-3 transmitter
• AFH
• CVSD and SBC - Hardware
• Interfaces: SD card, UART, SPI, SDIO, I2C, LED, PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, Two-Wire Automotive Interface (TWAI, compatible with ISO11898-1)
Esp32c3 Devboard Mini Seedsudio
In stock
Features:
- Outstanding RF performance,Powerful ESP32-C3 SoC and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
- Thumb-size Design, 21 x 17.5mm overall dimension, portable and lightweight.
- Low power consumption, Lowest as 44 μA (deep sleep mode), with 4 working modes available.
- Onboard battery charge IC, Supports battery charging, great for various wearable scenarios and wireless IoT applications.
- Ready for productization, Single-sided components design, easily integrated into other boards and Seeed provides Fusion Service for rapid production.
ESP32S3 Dev Board Double V8
In stock
Features:
- Wireless Connectivity
- Low Power Consumption
- Rich GPIO Set
- Built-in Security
- OTA Updates
- Tool Is For Evaluation Of: ESP32-S3-WROOM-1
- Product Type: WiFi Development Tools
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
In stock
This ESP8266 Serial Port To Wi-Fi Module, FL-M1S serial transceiver module, based on ESP8266 SoC with an integrated TCP/IP protocol stack It can either host the application or offload all Wi-Fi networking functions from another application processor.
ESP8266 has powerful onboard processing and storage capabilities allowing it to integrate with sensors and other devices through GPIOs with minimal development up-front and minimal loading during runtime.
Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including the front-end module, is designed to occupy minimal PCB area.
ESP8266 SERIAL WIFI MODULE ESP-01
In stock
The ESP8266 WiFi module is an easy to use and popular module for the development of Internet of Things – IoT and WiFi related projects and applications.This low cost module greatly simplifies building IoT products. The ESP8266 Module is available in many variants. This ESP-01 Variant is the most popular and easy to interface module.
This module is suitable for multiple projects both easy and complex form turning an LED on and off, switching a device on and off, uploading data to the internet and cloud, etc. It can also communicate with multiple sensors and devices through its input pins with minimal external components.
EsunPLA+ filament,1.75mm 1kg Black
In stock
Main Features of PLA+:
eSUN High-Quality Filament:
eSUN PLA+ Compatibility:
Diameter Consistency:
Colors:
EsunPLA+ filament,1.75mm biege 1kg
In stock
Main Features of PLA+:
eSUN High-Quality Filament:
eSUN PLA+ Compatibility:
Diameter Consistency:
Colors:
Not only are eSUN’s colors refined individually, but they also have one of the largest ranges available on the market.
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
EYE BLINK SENSOR
In stock
Eye Blink Sensor is compatible with Arduino, Raspberry Pi, AVR, PIC. This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Eyeblink Sensor with Goggles ( ROUND SENSOR )
In stock
The eye–blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit. The exact functionality depends greatly on the positioning and aiming of the emitter and detector with respect to the eye.
F405 Flight Controller With OSD 16M Black Box Flight Control
In stock
Features:
- This is a combo kit of Flight controller & ESC
- High-performance & efficient flight controller & ESC
- Lightweight, Easy to connect
- Compact in size
- The flight controller comes with an ARM processor
- ESC is built to give the best performance
F450 / Q450 Quadcopter Frame
In stock
This F450/Q450 Quadcopter Frame is made from 35% of Glass Fiber which makes it tough and durable. They have arms of ultra-durable Polyamide-Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.
They are strong, light, and have a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB and makes the mounting clean and neat.
F550 / Q550 Hexa-Copter Frame
In stock
This F550 / Q550 Quadcopter Frame is made from 35% of Glass Fiber which makes it tough and durable. They have arms of ultra-durable Polyamide-Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.
They are strong, light, and have a sensible configuration including a PCB (Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB and makes the mounting clean and neat.
F7 flight controller
In stock
- It Supports 3S-6S Lipo battery voltage input
- Multiple connectivity options (UART, 12C, SPI)
- Integrated OSD for on-screen display
- Compact design for effortless installation in various drone frames
- Built-in buzzer for easy locating and recovering our drone
Female to Female DuPont Line 40 Pin 30cm
In stock
Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
FEMALE TO FEMALE JUMPER WIRES 40PCS 10CM
In stock
Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Flame Sensor Module 3pin
In stock
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.
Greater the flame, farther the test distance. It has the Detect angle of 60 and very sensitive to flame spectrum.
It produces the one channel output signal at the D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.