Shop
Emax ES08MA II Servo
In stock
This is an EMAX ES08MA II 12g mini metal gear analog servo. This is used in science projects, robotic equipment, and RC models. It has metal gear for a better experience.Power and durability in a small package, the Emax ES08MA II Metal Gear Servo is a great choice for your fixed-wing plane servo.
Emax ES08MDII servo 12g
In stock
Features:
- High-quality Material
- An ideal choice for RC Helicopter Tail.
- Masses of torque,
- Excellent speed.
EMAX ES3352 12.4g Mini Metal Gear Digital Servo
In stock
EMAX ES3352 12.4g Mini Metal Gear Digital Servo for RC Airplane
Dual-bearing design maintains low backlash and smoothness of the servo for a long time
2.4 Kgf.cm, 0.12 Sec/60° at no load under 4.8V and2.8 Kgf.cm, 0.10 Sec/60° at no load under 6.0V
EMAX MT2213 935KV Brushless DC Motor for Drone – Red Cap (CCW)
In stock
f you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Agarwal , we have everything for you to get started with your drone project. This motor provides a Motor kV of 2200.
In the field of Multirotors, there are so many brands that are making drone motors but Emax is giving us the best quality of drone motor at an affordable price.
Emax brand gained more popularity in the market due to the highest standards for optimal performance and reliability.
EMAX MT4008 470KV CCW Brushless Motor
In stock
The EMAX MT4008 470KV CCW Brushless Motor is a high-performance motor designed for large drone applications, offering a balance between power, efficiency, and reliability.
EMG Muscle Signal Sensor Kit With Professional EMG Cable
In stock
The Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes will measure the filtered and rectified electrical activity of a muscle outputting 0-Vs Volts depending on the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. Power supply voltage: min. +-3.5V.
This Muscle Sensor v3 from Advancer Technologies measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analog output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects.
ENC28J60 Ethernet Module 10pin
In stock
Features :
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Automatic Programmable Retransmit on Collision
- Programmable Padding and CRC Generation
- Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- Chipboard ENC28J60/SS.
- The board 25MHZ crystal.
- The network interface board HR911105A.
- 5 V power supply pin.
- Stable performance.
- For Arduino, SPI, AVR, PIC, LPC, STM32.
ER 14505 Battery
In stock
This is Forte Lithium Battery of model ER14505 with 3.6V 2.4 amp of AA size. These types of batteries are used in(1) Meter (water, electricity, gas meter, and AMR) (2) Alarm or security equipment (smoke alarm system and detector) (3) GPS system, GSM system (4) Real-time clock, Car electronic (5) Digital remote control machines (6) Radio and other military facilities (7) Remote surveillance systems
ESC 35A MINI
In stock
This HKSRC 35A ESC 2-5S Brushless ESC Speed Controller with LED adopts a 32-bit stm32f051 main control chip, which has faster response speed and processing capability. The operating frequency of up to 48MHZ and high-performance three-in-one drive make the throttle signal receiving delay lower, and the response and control of the motor change.
High speed and precision allow the flying player to enjoy the thrill and advantage of flying at speed.
ESD MAT 1X1 Sq M
In stock
Green usd mat is used for industrial purpose particularly for electronics manufacturing industries ,mostly used on top of the working tables for proper grounding and for static discharge
Esp PROG JTAG Debugging Downloader
In stock
- ESP-Prog is easy to use and can be connected to a computer with only one USB cable. The computer can recognize the download function and the two ports corresponding to the JTAG function.
- ESP-Prog can be connected to the user board using the cable. The connector is available in 2.54 mm and 1.27 mm pitch packages with a foolproof design. The user board is required to place the Program (6-Pin) and JTAG (10-Pin) connectors in the corresponding order.
- Considering that the power supply voltage of different user boards may be different, the two interfaces of ESP-Prog can select 5V or 3.3V power supply through Pin Header, which has strong power compatibility.
ESP-12F ESP8266 Wifi Wireless IoT Board Module
In stock
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
ESP-14 Wifi Board, Embedded with STM8S003F3P6
In stock
- The module is built into a powerful STM8003 chips, all the pins are lead out, and the serial port from STM8003 is connected with ESP8266
- You can write STM8 program, ESP8266 implementation of most of the smart lamp home and WIFI things through AT command control Features.
ESP-32 Wifi Bluetooth Combo Module
In stock
ESP32 is a single-chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies a minimal Printed Circuit Board (PCB) area.
Esp12F Chip-8266
In stock
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
In stock
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller. The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe and reliable, easy to extend to a variety of applications.
ESP32 BASEBOARD for 30pin Dev Board
In stock
Features:
- Dual Interface Design
- 30-Pin Connector
- Enhanced Connectivity
- Expansion Capabilities
- Robust Build Quality
- User-Friendly Design
- Open-Source Compatibility