Shop
Double Fans Radiator for Raspberry Pi 3B+/4B
In stock
This is a must-have accessory to experience the high performance of the Raspberry Pi 4. The 50 x 20 mm aluminum alloy heat sink with a Double Dual Cooling Fan Heat Sink Metal Case is designed especially for Raspberry Pi 3B and 4B. This is a high-quality premium quality heat sink for industrial and continuous use applications for the Raspberry Pi 4. This heat sink enables the Raspberry Pi to function with very high reliability and at higher efficiencies for applications that require maximum computing power.
DOUBLE SIDE PIPE SUBMERSIBLE & NON SUBMERSIBLE MINI WATER PUMP DC 5V
In stock
This is a low cost mini submersible type water pump that works on 3-6V DC. It is extremely simple and easy to use. This Pump has one inlet valve and one outet valve. Connect the inlet valve to your water source and outlet valve to your desired location and power the motor with 3-6V to start pumping water.
Great for building science projects, fire-extinguishers, fire fighting robots, fountains, waterfalls, plant watering systems etc.
This motor is small, compact and light. It can be controlled from a micro controller/Arduino using our DC Motor Drivers or one of our Relay Boards. You may use our 5V SMPS Power Supply Adapter to run this pump. You may also use our 6V Solar Panel to run the pump with an appropriate 6V voltage regulator.
This pump can be used under submersible and non submersible conditions.
DPDT Robotic Box
In stock
Applications:
- Remote-controlled robot.
- AVR-based robotics projects.
- ARM-based robotics projects.
- PIC-based robotics projects.
- Arduino-based robotics projects.
- Raspberry-pi-based robotics projects.
- Android-based robotic projects.
Drill chuck big for (555 Motor 2.5″ MOTOR)
In stock
Compatible with most of rotary tools used in hardware,hobby,home,etc. Suitable for installation inside diameter of less than 3.0mm drill,electric grinding,hanging mill,hose above. Suitable for use with sheet iron, aluminum, copper, plastic etc. Comes with 5 different size to meet your need, Drill collet size: 05mm, 10mm, 15mm, 25mm, 30mm.
Drill chuck big for (775 3″ MOTOR)
In stock
Drill chuck for 775 motors (5mm shaft) Strong impact resistance. Compatible with impact drill and different power electric drill. Clamping range: 1.5 mm-10 mm drill, the maximum clamping 10 mm. Adaptor Connection size: (inner hole diameter is 5 mm) for 775 motors, Drill, and woodworking machine. The shank with a screw can be tight and flexed for you. Maximum clamping fit motor shaft diameter 5.00 mm Package included: Drill chuck, 5 mm motor Adaptor, 2mm Allen key, Drill chuck key.
Drone Mechanical claw(Gripper) remote control mechanical gripper clamp, universal Release and Drop for Drones
In stock
UAV Mechanical Claw Remote Control Mechanical Grab Hook, Airdrop Device for Deliver of Flowers Fishing Mechanical grabber for remote controlled vehicle
Features:
UAV mechanical flying claw has a robotic arm structure, which can achieve precise grasping and placement of objects.
Including multiple movable joints and clamping devices, allowing for flexible grasping of objects of different shapes and sizes.
Designed specifically for use with drones, it can be installed on the body robotic arm of the drones and controlled through remote control automation programs.
Selected quality materials, compact body, integrated design, eassy to install.
Widely used, such as logistics and transportation, outdoor and search, air dropped supplies, expresses delivery, flower delivery, rings delivery, fishing, baiting, wedding, proposal.
Package Includes:
1 UAV Remote Control Mechanical Claw
Note:
Please allow 1-2cm errors due to manual measurement.
Please allow for slight color differences due to different display resolution.
Drone Nozzle 110 Degree 20mm Double
In stock
Working Pressure:: 2-6 bar
Wheelbase: Screws
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: agricultural spray nozzle
Tool Supplies: agricultural spray nozzle
Technical parameters: Value 2
Spray Angle:: Flat Fan
Size: 8MM
Remote Control Peripherals/Devices: agricultural spray nozzle
Recommend Age: 14+y
RC Parts & Accs: agricultural spray nozzle
Quantity: 1 pcs
Origin: Mainland China
Nozzle Model:: 11001,11002,11003,11004,11005,11006,11008,110010
Model Number: 8MM
Model Number: agricultural spray nozzle
Maximum pressure resistance:: 20KG(2MPA)
Material: Plastic
Intubation Diameter:: 8MM
Four-wheel Drive Attributes: agricultural spray nozzle
For Vehicle Type: Airplanes
Flowing mode:: Inside water drip prevention
Feature:: Drip-proof
Boom outer diameter:: 20MM
Application areas:: agriculture, forestry
Drone Spray Nozzle 3810
In stock
- 100% Pure
- Used to replace old, easy to use and reliable.
- 1. High precision machining, anti-aging, high temperature resistance.
- 2. It is not easily deformed, reliable operation and long service life.
- 3. Effectively improve quality and productivity.
- 4. Tested in good condition,100% working!
- 5. We specialize in drone accessories that you can buy with confidence.
Drone Spray NOZZLE DOUBLE HEAD
In stock
Specifications:
Product name: extended rod double sprinkler head
Weight: 113.7 g
Nozzle: VP110-015
Filter: 80 mesh stainless steel
Outside diameter of water pipe: 8mm
Total length of sprinkler head: 28cm
Drop Rack Kit with 25T Servo Arm JX PDI-6221MG 20kg Unassembled Clamps
In stock
Remote Control Servo Release Hook.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
In stock
The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
In stock
The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
In stock
The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
DRV8833 2 Channel DC Motor Driver
In stock
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages.
Ds0138 Diy Osc Kit)
In stock
This is DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit. This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen.
It’s easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
This boost converter is a great match for DSO138 oscilloscope kit.
DS18B20 Temperature Sensor Module
In stock
DS18B20 Temperature Sensor is suitable for the cold storage, granaries, storage tanks, telecommunications room, electric power room, cable trough, and other temperature measurement and control areas; bearing, cylinder, textile machinery, air conditioning, and other small space industrial equipment temperature and control; , Refrigerator, freezer, and low-temperature drying oven, etc. heating/cooling pipe calorie measurement, central air conditioning household thermal energy measurement and industrial temperature measurement and control and Many more..
DS18B20 Water Proof Temperature Probe
In stock
This is DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip which is based on the DS18B20 sensor.
It is very handy for when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over a long distances.
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter.