Shop
DC12V 0.28A 5015 BLOWER FAN
In stock
12V DC 5015 Double Ball Centrifugal Fan made of special and premium materials. It is high temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs.
DC12V 36V 500W PWM DC Brushless Motor Controller No Hall Motor Driver Control Board JYQD-6.3E2
In stock
Application notes:
- Confirm that the voltage and power parameters of the motor do not exceed the range of the driver board as specified.
- The JYQD-V6.3E2 driver board is a bare board without housing and a heatsink. If the power of the motor is below 60W, it does not need to add a heatsink, It only needs to ensure normal ventilation and wall insulation. If the power of the motor is more than 100W, it must add a heatsink.
- Please take note that the JYQD-V6.3E2 driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
- The 5V output port on the driver board prohibits connecting an external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
- The “Signal” terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
DC12V 4010 FAN
In stock
This is the best quality 4010 12V Double Ball Cooling Fan. Use this compact 12V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard.
DC12V 4020 Fan
In stock
Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. It is made of high-quality PBT + 30% glass line + VO and Bearing with high precision makes it provide long life and low noise. It can be taken in used to handle the temperature cooling 75℃. Its Working temperature is 40℃ with a continuous working 24-hour capacity.
DC12V 5015 FAN
In stock
This is best quality 5015 12V Cooling Fan. Use this compact 12V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard. This Fan is also always in demand for High Ampere Motor driver as well as PC CPU Box
DC12V 5020 FAN
In stock
This is best quality 5020 12V Cooling Fan. Use this compact 12V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard. This Fan is also always in demand for High Ampere Motor driver as well as PC CPU Box.
DC12V 6015 COOLING DC FAN
In stock
This is the best quality 6015 12V Cooling Fan. Use this compact 12V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard. This fan can be directly connected to Raspberry Pi pins 4 and 6.
DC12V 7010 Oil Containing Cooling Fan
In stock
This is best quality 7010 12V Cooling Fan. Use this compact 12V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard. This Fan is also always in demand for High Ampere Motor driver as well as PC CPU Box
DC24V 5010 Cooling Fan
In stock
This is best quality 5010 24V Cooling Fan. Use this compact 24V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and a Connector to connect onboard. This fan can be directly connected to Raspberry Pi pins 4 and 6. This Fan is also always in demand for High Ampere Motor driver as well as PC CPU Box
DC24V 8025 Cooling Fan
In stock
A cooling fan is a vital component in a car cooling system, that helps take away all heat absorbed from the engine using coolant. All its work is done through the radiator by pushing or pulling air through the radiator. This is the best quality 8025 24V Cooling Fan. Use this compact 24V fan to keep your projects cool.
DC3-6V 130 DIY Toy Motor
In stock
This is the DC motor, which can be used in any DIY project or in the small toys. With an operating voltage range of 3V-6V this motors can be operated using two AA batteries or with a 5V USB power supply.
DC5-12V PWM Power controller Remote Control Relay Module Remote Switch lamp PWM With LED Display
In stock
How to use:
1. Connect:
Plug the signal cable into an idle receiver channel that corresponds to a switch on the remote.
The power indicator will be lighted when connected to the receiver.
The work indicator lights up when the switch channel is open and vice versa.
2. Working mode:
The red LED light is a power indicator.
Another red LED indicates the relay’s operating status.
DC5-24V 360 Pulses Incremental Photoelectric Rotary Encoder
In stock
In projects requiring high sensitivity, it converts the position, direction of rotation, and speed of motion of a motor into an electrical signal and presents it to the user. Encoders come in two types: linear encoder (linear encoder) and rotary encoder (rotary encoder), depending on the different intended uses.
DC5-24V 400 Pulses Incremental Photoelectric Rotary Encoder
In stock
An encoder can be referred to as an electromechanical device that produces an electrical signal in response to detected movement. It is an electromechanical device that detects the rotation or displacement movement of a connected shaft by means of magnetic, mechanical, resistive, or optical technologies and generates a digital electrical signal from the detected data, producing analog or digital output.
DC5-24V 600 Pulses Incremental Photoelectric Rotary Encoder
In stock
The Optic Encoder that is most preferred and widely used due to its usage advantages generates an electrical signal based on the interruption of reflected light due to the optical source inside the device.
DC6-12V MINI Aquarium water Pump R385
In stock
If you are wandering to build a Project with a pump and don’t know what will be the best pump for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your project.
This DC6-12V MINI Aquarium Water Pump R385 is the perfect choice for any project that requires water to be moved from one place to another.
This pump can be used in:
- Small aquarium pump
- Automatic plant watering system
DEAN CONNECTORS
In stock
The Deans’ “Ultra” connectors are rated for 60 Amps of continuous load, up to 75 Amp & higher bursts. I have pushed mine to 100 Amp for short spikes without issue.
Deans Style XT Plug Nylon T Connector Male Female
In stock
Deans Style XT Plug Nylon T Connector Male/Female Connector For RC LiPo ESC Battery are sold as matching male-female and have a current rating of 50 A. Dean Connector T plug male and female widely used for robotics purpose to connect the battery.
They are the smallest high-current connectors we know of, and they are great for projects that involve bigger motors and controllers. Often used to connect batteries in radio control models. Perfect for applications that require a high current draw, up to 50A continuous draw. This connector is perfect to connect your RC and Robotics Electronics to a Battery.
Applications:
- Suitable for use in RC hobby, car, boat, plane, helicopter, lipo battery, robotics etc.