Shop
CR 123A Battery
In stock
- Delivers superior performance
- Delivers quicker recovery time between flashes
- Snap more photo’s in less time
CR 2025 BATTERY
In stock
CR2025 3V Lithium Coin Battery -5Pcs. is the perfect source for a wide range of very small-scale electronic devices. Two or more conventional batteries can be replaced by a single lithium battery. That’s because there’s a lot of power in this ultra-compact design: 3V. Typically used in small, high-performance devices like cameras, glucose meters, and alarm systems.
90% of their original capacity, that’s how much power the Panasonic CR2025 Lithium coin batteries still have after 10 years. Their chemical stability, which is due to the combination of lithium and manganese dioxide, is very high. Long-term discharge has been verified at all operating temperatures under low-load discharge conditions.
Applications:
- calculators
- digital watches
- memory backup
- laser pens
- car keys
- fitness appliances, and medical devices like a clinical thermometer and a tensiometer. It has a proven track record for appliances where conventional batteries cannot be used. It delivers 3 Volts of impressive power and holds a sizable charge of 90 mAh.
CR 2032 Battery
In stock
The Maxell CR2032 3V Lithium Coin Battery -5Pcs. is the perfect source for a wide range of very small-scale electronic devices. Two or more conventional batteries can be replaced by a single lithium battery. That’s because there’s a lot of power in this ultra-compact design: 3V. Typically used in small, high-performance devices like cameras, glucose meters, and alarm systems.
90% of their original capacity, that’s how much power the Maxell CR2032 Lithium coin batteries still have after 10 years. Their chemical stability, which is due to the combination of lithium and manganese dioxide, is very high. Long-term discharge has been verified at all operating temperatures under low-load discharge conditions.
CR2354 BATTERY
In stock
CR Series Lithium coin button batteries from Panasonic. These batteries are available in a variety of different sizes and capacity options to suit your application. These non-rechargeable batteries are ideal for smaller electronic devices and have a longer lasting life than alkaline equivalents. These batteries are small, round and slim and are normally used on their own but with their less self-discharge they are able to hold their charge for a longer period of time.
Crystal Ball UBEC V1
In stock
The CB UBEC V1 is a compact DC-DC converter that steps down high-voltage power sources, like LiPo batteries, to two stable 5V 5A outputs. It is designed for drones, RC models, and embedded systems, offering consistent and efficient power for your electronics.
Quick Overview: Crystal Ball UBEC V1
- Stable & Regulated Power
- High Efficiency
- Overvoltage & Surge Protection
CSR8635 Bluetooth 4.0 Stereo Audio Receive Board Speaker Module
In stock
- Compliant with Bluetooth v4.0 specification
- Highly replaceable, fully compatible with the Bluetooth modules of our other Bluetooth chips, no need to change the design to directly replace
- 3/5 button inputs (switching / pairing / answering / hanging, play / pause, volume +, volume -, previous, next)
- Built-in DSP can realize echo cancellation, environmental noise elimination, EQ adjustment sound effects, etc.
- Module own antenna, good RF distance, and consistency
- 128K EEPROM
- USB sound card function
- AUX-IN input switching function
CSR8645 Low Power Bluetooth V4.0 Audio Amplifier Support aptX
In stock
This Bluetooth Audio Module based on the CSR8645, with latest Bluetooth V4.0. It is an Intelligent wireless audio data transmission product, low price, and high-efficiency stereo audio wireless transmission. With this module, you will easy to make your music wireless transmission, mainly used for short-distance transmission of music, you can easily connect Bluetooth laptop, cell phone, PDA and other digital products connected devices for wireless transmission of music.
CT-820×4 Coreless Motor and Propeller, 8mm X 20mm, Multi-color, Set of 4
In stock
These are Coreless motors with propellers, These coreless motors are exactly what you need if you want to build your own small-scale Quadcopters, Drones, helicopters, and RC planes. It is very small in size and in terms of producing thrust to lift your flying object chassis into the air. It’s a great motor for a beginner to start with because it’s much cheaper than a BLDC drone motor, so this motor is the best option if you want to get started.
CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver
In stock
Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver.
CT6B 2.4 GHz 6CH transmitter is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver .it is ideal for quadcopters and multirotor that require the 6ch operation.
CURRENT SENSOR(ACS712-5A)
In stock
The 5A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage.
Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc.
This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current.
The maximum AC or DC that can be detected can reach 5A, and the present current signal can be read via analog I / O port of Arduino.
D4184 Mosfet Module
In stock
With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. PWM speed regulation widely used to control the start and stop of the motor. The signal input side can be welded to the terminal or pin itself, compatible breadboard output can be soldered to the terminal or direct wire.
DB107
In stock
Mechanical Data:-
• Terminals: Plated leads solderable per MIL-STD-202, Method 208
• Polarity: as marked on case
• Mounting Position: Any
• Marking: Type Number
• Lead Free: For RoHS / Lead Free Version
DB25 D Connector – F
In stock
DB25 connectors are designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard so that multiple companies could design them into their products. DB25connectors were commonly used for serial peripheral devices like keyboards, mice, joysticks, etc. Also, they are used on DB25 cable assemblies for data connectivity.
DB9 Male Right Angle Connector
In stock
DB9 Male Right Angle Connector is the most common type of electrical connector. DB 9 connector is part of the D-sub miniature (D-sub) connector plug and socket family for computer and communication devices. DB-9 pins are arranged in rows of two, as one five-pin row above a four-pin row. The terminals of this connector are bent at a right angle.
DB9 Male Welded Connector
In stock
DB9 connectors are designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard so that multiple companies could design them into their products. DB9connectors were commonly used for serial peripheral devices like keyboards, mice, joysticks, etc. Also, they are used in DB9 cable assemblies for data connectivity.
DB9 USB to Serial Cable
In stock
This is the USB to Serial DB9 Male Adapter with Cable. USB to DB9 Male conversion cable for USB and serial devices lets users easily connect serial devices to a laptop/desktop with USB port. It offers features such as Plug and play, hot-swappable, etc.
DC 12V 6025 Cooling Fan
In stock
This is a miniature-size exhaust cooling fan. This fan is as small as your palm. Its working voltage is 12V DC. It can work with a simple 12V battery without any difficulty. This mini fan has the ability to run at a speed of 6800 ~ 13000 rpm. The body of the fan is built from a combination of resin and plastic material. The combination provides strength and insulation to the fan.
DC 12V 8015 Cooling Fan
In stock
This is a miniature-size exhaust cooling fan. This fan is as small as your palm. Its working voltage is 12V DC. It can work with a simple 12V battery without any difficulty. This mini fan has the ability to run at a speed of 6800 ~ 13000 rpm. The body of the fan is built from a combination of resin and plastic material.