Shop
868mhz rfid cards
In stock
54x85x0.82mmFrequency:865-868MHzOperating Temperature:-25 to 70CRead Range:1-10mMemory:EPC 128 bit, User 512 bit, TID 48 bitWeight:9gISO Standard:ISO18000-6C EPC 1Gen 2
8ch Touch Ttp226
In stock
The TTP226 is a touchpad detector IC which offers 8 touch key. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. Capacitive touch allows electronics to sense when your finger is within a few millimetres of a surface to simulate a button “press” just like how the pushbutton works. Capacitive sensing may be used in any place where low to no force human touch sensing is desirable.
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
In stock
The 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08 comes with top set screws which makes the inner ring of the bearing fix on the shaft. It is very convenient to install. There is a certain self-aligning ability for the bearing, so it can be mounted on a general accuracy rack.
Well-adapted and widely used. Two-bolt housing with ball bearing insert for ready-to-mount installation. Setscrew locking collar for secure attachment to the guided shaft. Between the inner bearing and outer fixing ring angle can fine tune.
8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08
In stock
This 8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08 is a quality flanged ball bearing end mount, widely used in CNC and 3D printing applications. Made from a zinc-aluminum alloy, it houses a 608 bearing, which supports linear shafts, leadscrews or ball screws. Secured using two grub screws, this bearing mount is a convenient option for your project or CNC machine.
The insert bearings are the deep groove ball bearings with wide inner rings. Pillow Block Flange Bearing is widely used in various types of machinery, such as machinery and equipment, conveyors, machine manufacturing etc.
8MP IMX219 FISHEYE CAMERA
In stock
- To use this camera, please follow this tutorial for hardware setup.
- After hardware setup, you need to do software setup to test the camera. To do that, please follow this tutorial for software setup.
8pin Combiconn M/f 3.81MM 90D
In stock
he “5mm pitch” refers to the distance between each pin or connection. In this case, it is 5mm, which means that each pin is spaced 5mm apart from the next one. The “pluggable type” means that the terminal block is designed to be easily plugged and unplugged. This allows for easy maintenance and replacement of components, without the need for soldering or other complex procedures.
8x8mm Blue Aluminum Alloy Coupling
In stock
The Aluminum Alloy Coupling of 8x8mm for 3D Printers and CNC Machines is lightweight coupling and exhibits more strength in class. This type of couplings is very common and found in a wide range of CNC Machines.
The bore diameters of this coupling are d1=8mm and d2=8mm. Each coupling is equipped with a four M4 machine screw for fastening the shafts in the coupling hole.
9 DOF ROBOTIC KIT
In stock
This robot is a professional small humanoid robot which is an excellent first step for initiation into the field of Humanoid Walking Robots
The High Torque Standard Servo Motor included with the kit, The servo controller is Arduino Uno R3 based USB 12 Servo Controller alongwith Arduino Uno code. The software helps to develop the complex sequences in real time on the robot kit and then it also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous.
9-12 V BD243 Mini Tesla Coil
In stock
9-12 V BD243 Mini Tesla Coil It is a fully assembled kit ready to use for your DIY Projects. Tesla coil is a transformer (resonant transformer) that operates on the principle of resonance. It can produce high-temperature and high-pressure plasma and can ignite, wirelessly transmit electricity, illuminate fluorescent lamps.
It has wonderful arcs and used for many fun and very interesting scientific experiments. This product is newly developed. The primary coil is already in the PCB board. It does not need to be wound on the outside. It is convenient for fans to install, high efficiency and beautiful.
90 MM RADIATORS
In stock
Suitable for computer CPU cooling,GPU,VGA,CHIP,industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling. Also suitable for Peltier based cooling systems
915Mhz 1000mW Mini Telemetry Kit
In stock
This is a 915Mhz 100mW Radio Telemetry Kit that is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source which is, of course, the reason we are able to use it on our own version at Unmanned Tech.The full features and specifications are listed below but the main features are that both air and ground modules are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.
915Mhz 500MW Telemetry Kit
In stock
This 3DR Radio Telemetry 500mW Set allows you to link to a flight controller to a USB or UART-equipped device such as a computer, laptop, or tablet supporting a USB connection (OTG). The new V2 radios, no longer have a separate Air/Ground module, as both transceivers can use UART or USB connections and support both modes. The Radio set not only lets you see live data, such as live GPS position overlaid on a map, system voltage, heading, waypoint navigation even artificial horizon and so much more.
9225 DC24V Cooling Fan
In stock
Axial fans blow air along the axis of the fan or parallel to the track of the blade axis.DC axial fans are found in a variety of applications, including computing, servers, telecommunication cabinets, and any type of equipment where the need for thermal control is necessary for the improved reliability and life extension of the components that are included in the system.
9v 12v 24v 36v to 5V 3A Dual USB DC Buck Charger Module
In stock
Features :
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
- Small and handy module.
- Easy to use.
9v Battery Duracell
In stock
Duracell offers a wide range of batteries for electronics that require reliable power. Duracell Ultra D batteries are alkaline batteries ideal for powering all your devices with extra performance for high-drain devices and are available in sizes C, D, and 9V. Duralock technology keeps unused Duracell batteries fresh and powered for up to 10 years in ambient storage. These batteries are best Duracell’s alkaline proposition for high drain devices, such as digital cameras, photoflash, high powered toys or boomboxes, and of course is a great fit for regularly used devices such as motorized toys, flashlights, portable game controllers, shavers, CD players, toothbrushes and any other.
9v battery pack (10pcs)
In stock
Its Universal 9V battery size and connecting points; it is useful in many DIY projects as well as household applications and they can easily be replaced and installed; the same as you would an AA battery or an AAA battery.
Whether you need a new battery for your applications like a Flashlight, Portable Phone Charger wireless doorbell, Wireless audio transmitter-receiver systems or your kid’s toys, etc. Even if you are looking for a long-lasting, reliable option for your sensor devices like a smoke detector, everyone needs a good 9-volt battery every once in a while. It’s also a great idea to keep an extra 9 volt batteries around in case of an emergency. That’s why we’ve found one of the best 9-volt battery available.
Safety Precautions :
- Avoid short-Circuit the battery terminals.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or water after use.
A4988 driver Stepper Motor Driver
In stock
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).
A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.
There are no phase sequence tables, high-frequency control interface programming, etc.
AA 1 cell Battery holder
In stock
The BH5-1001 battery holder AA is a compact and reliable battery holder designed to fit 1 cell AA batteries with wire leads of 150mm length. The red wire indicates the positive and the black wire indicates the negative terminal. The standard color of the holder is black, but we also offer customization of colors to meet your specific requirements. The holder is made of ABS housing and nickel-plated spring steel, ensuring durability and longevity. It is suitable for a variety of applications, including toys and TV remote controls. The standard package includes 100pcs per bag. With operating temperatures ranging from -25C to +85C, this battery holder is suitable for use in a wide range of environments. OEM and ODM services are also available.