Shop
5V 2 Channel SSR G3MB-202P Solid State Relay Module
In stock
A two-channel relay module (HCMODU0115) featuring 2x Omron G3MB-202P solid state relays. This 5V 2 Channel SSR G3MB-202P Solid State Relay Module is capable of switching AC voltages between 100 and 240V at up to a 2A current. The module can be controlled from a 5V digital source such as an Arduino microcontroller.
A resistive type fuse is provided on the module to help protect excessive current draw.
This 5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module
In stock
This 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger) is based on the G3MB SSR relay which can control up to 2A at 240VAC. This is an 8 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
5V 2A Wireless Transmitter Receiver Charging Coil Module
In stock
The 5V 2A wireless transmitter receiver charging coil module is for a variety of small electronic products, wireless charging, power supply development, and design, with a small size, easy to use, high efficiency, and low price characteristics.
It is mainly used in mobile electronics products such as for charging mobile phones and electronics gadgets wirelessly. The adoption of a Contactless charging power supply can be used to sealing of the products to make them waterproof and dustproof and increase product service life to make it more convenient.
5V 3A UBEC
In stock
Features:
- Suitable for: RC AirPlane Multirotor helicopter
- Ideal for high power application requiring currents up to 3A.
- Small size UBEC
- Easy to use.
5V 4 Channel Relay Module
In stock
This is 5V 4-Channel Relay interface board, be able to control various appliances and other equipment with large current. It can be controlled directly by Microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This is 0~2.5V triggered Low Level Trigger 4 Channel Relay Module.
5V 4 Channel SSR G3MB-202P Solid State Relay Module
In stock
This 5V 4 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
5v 5a Buck Module with Usb XY-3606
In stock
Features:
- The synchronous rectification scheme, wide voltage, high current, high efficiency.
- With DC plug and terminals, easy to use.
- With USB port, fast-charge identification chip compatible with Android and iPhone mobile phones.
5V 7A Sugar Cube Relay
In stock
SPDT(Single Pole Double Throw) relay is used as a switch for high current AC/DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 7A connected to it. The coil resistance of this relay is 70 ohm whereas the coil current is 70mA. The trigger voltage for this relay is 5V. There are 5 pins in this relay i.e, Coil end 1, Coil end 2, COM(common), NC and NO. Coil end 1 and Coil end 2 are used to trigger ON/OFF the relay. One end is connected to a 5V supply and the other is connected to the ground of the circuit. Common is connected to the one end of the load to be controlled. The other end of the load is connected to either NC or NO. If the load is connected to NC(Normally Closed) then the load remains ON before trigger. And if it is connected to NO(Normally Open) then the load remains OFF before trigger. These relays are usually used in home automation, switching circuits, security circuits, etc.
5V 8 Channel Relay Module
In stock
It is a 5V 8 Channel Relay Module. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 6-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
5v 8 channel Relay Module with Optocoupler
In stock
It is an 8 Channel Isolated 5V 10A Relay Module opto coupler, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A and DC30V 10A.
One can connect a microcontroller with standard interface directly to it. Red working status indicator lights are conducive to the safe use. The 8 Channel Isolated 5V 10A Relay Module opto coupler has a wide range of applications such as all MCU control, industrial sector, PLC control, smart home control.
5V Dpdt RELAY Telecom Type 2a
In stock
The 5V 2A Telecom Relay has high current capacity. It has contact rating of 2A @ 30V DC. The breakdown voltage between contact and coil is also very high. It requires very less power for operating.
5V Dual Channel Relay Module
In stock
This is a 5V Dual Channel Relay Module with Optocoupler for Arduino PIC ARM. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
This 5V Dual Channel Relay Module has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.
5V Fast Charging Wireless Charger PCBA DIY Accessories Standard
In stock
Features:
- Multiple Power Levels: Choose from 5W, 10W, or 15W charging options to suit your device’s requirements and achieve optimal charging performance.
- Micro Type-C Connector: Equipped with a Micro Type-C port, this module provides a reliable connection for modern devices, enhancing versatility and ease of use.
- Universal Compatibility: Designed to work with a wide range of mobile phones and devices, making it a practical choice for various charging needs.
- PCBA Circuit Board: The module includes a high-quality PCBA (Printed Circuit Board Assembly) for reliable performance and durability in wireless charging applications.
- Integrated Charging Coil: Features a built-in charging coil to facilitate efficient wireless power transfer and maintain a streamlined design.
- DIY Friendly: Ideal for DIY enthusiasts and tech builders, this module allows for customization and integration into personal projects or existing setups.
5V Flexible LED Matrix Panel 12*68cm 1536 led
In stock
Features:
- It is thin and can be folded and rolled up, which is convenient for transportation.
- 5V Flexible Led Matrix Panel has all paste installation and no light leakage.
- Mobile APP control, support modifying text, graffiti, animation and other content.
5V Flexible LED Matrix Panel 14.6×3.6 1024 leds
In stock
Features:
- It is thin and can be folded and rolled up, which is convenient for transportation.
- 5V Flexible Led Matrix Panel has all paste installation and no light leakage.
- Mobile APP control, support modifying text, graffiti, animation and other content.
5V Step-Up Power Module
In stock
Features:
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency:85%(input 3.7V output 5V/1A).
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
- Intelligent temperature control and overtemperature protection.
- Integration output overvoltage protection, short circuit protection, overload protection.
- Integration overcharging and over-discharging protection.
- Support trickle mode and zero voltage charging.
- When charging: red light flashing.
- Fully charged: Red light glows for a long time.
5V-12V DC Brushless Driver Board Controller For Motor 3/4 Wire
In stock
Features:
- Type: Voltage Regulator
- Speed range: from 0% to 100%
- Phase inversion Control: Yes
- Voltage polarity protection: Yes
- Overcurrent Protection: Yes.
- Suitable for hard brushless motor, brushless motor drive and other miniature 3 / 4 wire brushless motor without hall
