Shop
50W ELEMENT
In stock
Replacing the heating element in a soldering iron is a relatively straightforward process. Here’s a general guide on how to do it:
- Disassemble the Soldering Iron: Depending on the model, you may need to unscrew or detach the handle or other parts to access the heating element. Follow the manufacturer’s instructions or consult the soldering iron’s user manual if available.
- Locate the Heating Element: Once you have access to the internal components, identify the heating element. It is usually a metal coil or ceramic rod located near the tip of the soldering iron.
- Disconnect the Wiring: Carefully disconnect the wires that are connected to the heating element. Take note of their positions or take a photo to ensure proper reconnection later.
- Remove the Old Heating Element: Loosen any fasteners or screws holding the heating element in place. Gently pull out the old heating element, being cautious not to damage any surrounding components.
- Install the New Heating Element: Take the new heating element and carefully insert it into the designated slot. Secure it in place using the appropriate fasteners or screws.
- Reconnect the Wiring: Reattach the wires to their corresponding terminals on the new heating element. Ensure a secure connection, double-checking the positions based on the earlier notes or photos.
- Reassemble the Soldering Iron: Put the soldering iron back together by reattaching or screwing in any previously removed parts, ensuring a proper fit.
- Test the Soldering Iron: Plug in the soldering iron and allow it to heat up. Confirm that the new heating element is functioning correctly by checking if the tip heats up to the desired temperature.
555 DC6-24V Mini Brush DC Motor (Diameter 35MM) 12V
In stock
The 550 DC6-24V Mini Brush DC Motor, with a diameter of 35mm, operates efficiently within a 6-24V range. Specifically designed for 12V operation, it achieves a rapid speed of 8000 revolutions per minute (RPM). This compact motor offers versatile applications, making it suitable for various projects demanding high speed and precision, such as in robotics, DIY electronics, and automation systems.
555 Timer Relay 12V
In stock
This NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V, based on the NE555 chip, high-performance timing CPU design. The power indicator LED and switch trigger timing indication LEDs. Timing from microseconds to long hours. Applicable to vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
This is a monostable generator based on the NE555 integrated circuit. It has an adjustable delay time from 0 to 10 seconds using the potentiometer or by changing the capacitance. It is also capable of controlling the device below 220V/10A.
555 Timer Relay 5v
In stock
This is a monostable generator based on the NE555 integrated circuit. It has an adjustable delay time from 0 to 10 seconds using the potentiometer or by changing the capacitance. It is also capable of controlling the device below 220V/10A.
5DOF Industrial Robotic Arm DIY Kit
In stock
Kit contains:
1. Aluminum Parts/Brackets
2.MG996R Servo Motors – 5
3. Gears – 2
4. On/Off Rocker Switch – 1
5. Servo Horns – 5
6. Metal Clamps
7. 3 mm Flange Bearings – 3
8. Pillow Block Bearing – 1
9. 10 mm Shaft – 1
10. Spanners
11. Allen Keys
12. Spacers
13. Req Allen Bolts and Nuts
14. Assembly Manual
5mm Bi-color LED Red Green 3Pin – Common Cathode( C.C )
In stock
- Bi-color LED
- Common Cathode Configuration
- 3-Pin Design
- Compact Size
- High Brightness
5mm DC Jack Male-Female Pair Connector with Wire
In stock
This is a DC Jack Connector with Wire (Male and Female). It has many applications. It can be used for any 3 to 24 volt up to 5 Ampere applications.
5mm RGB LED Diode Lights Tricolor (Multicolor Red Green Blue 4 pin Common Anode Clear DC 20mA/Color)
In stock
Specification: RGB Led Common Cathode Quantity: 100 pieces / Packs Lens: 5mm Diameter / Transparent / Round Luminous Intensity: R:2000-3000mcd / G:15000-18000mcd / B:7000-8000mcd Ultrabright Viewing Angle: 30 Degree Forward Voltage / Current: 2V-2.2V(R) 3V-3.2V (G/B) | 20mA Wattage: 0.2W Lead Length: 23.5mm / 24mm / 24.5mm / 26mm Polarity: Anode (Longer Part) | Cathode (Shorter Part) Used For: DIY PCB Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments, Throwies Project, Breadboard, T1 T-1 Bulb, Bulk Parts Replacement Search “chanzon led diode” for more related leds.
5MP CAMERA FOR RASPBERRY PI
In stock
Features :
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi 3 and 4Model B.
- Small and lightweight camera module.
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
5MP Raspberry Pi 3/4 Model B Camera Module
In stock
The 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable equips flexible cable for attaching with Raspberry Pi 3 Model B. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or CCTV projects. The lightweight camera board allows for it is useful in more practical roles, such as a hidden camera, or even a camera for a Pi phone.
5MP Raspberry Pi 3/4 Model B Camera Module
In stock
The 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable equips flexible cable for attaching with Raspberry Pi 3 Model B. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or CCTV projects. The lightweight camera board allows for it is useful in more practical roles, such as a hidden camera, or even a camera for a Pi phone.
5MP Raspberry Pi 3/4 Model B Camera Module
In stock
The 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable equips flexible cable for attaching with Raspberry Pi 3 Model B. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or CCTV projects. The lightweight camera board allows for it is useful in more practical roles, such as a hidden camera, or even a camera for a Pi phone.
5MP Raspberry Pi Zero W Camera Module
In stock
The 5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable equips flexible cable for attaching with Raspberry Pi Zero W. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or a CCTV project.
5V SSR Omron Relay
In stock
To use this Relay you need to connect the control input (number 3) pin to the 5V GPIO pin of the microcontroller board you are using and number 4 pin to GND and if 5V supply is on the there will be contact between number 1 and number 2 load pins.
5V 0.35A 36ml/min Silicone Tube Liquid Pump
In stock
When pumping liquids and no direct contact with the liquid is required, the all-new range of peristaltic pumps from kamoer offers a simple solution. Unlike most pumps, peristaltic pumps squish a silicone tube to produce the pump-action instead of impelling it directly, thus no direct contact with the liquid. This pump requires a 5 V DC supply and can produce a flow rate up to 36ml per minute. If speed control is required we suggest using a simple PWM signal.
5V 1 Channel Relay
In stock
It is a 5V 1 Channel Without Light Coupling Relay. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
5V 1 Channel SSR G3MB-202P Solid State Relay Module
In stock
A Solid State Relay is similar to a mechanic relay But it is a low-level trigger relay, So the relay will turn on at LOW level input (that is Digital 0 will turn ON the relay). And hence it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load
5V 10A PCB Mount Sugar Cube Relay
In stock
This is a 5V Relay Cube. This cube relay has an operating voltage of 5V and has a max current capacity of 10A. This makes it most suitable for use in microcontroller-based devices.