Shop
40CH 5.8GHZ TS832 BOSCAM TX
In stock
The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at a scant 21grams, it’s Perfect for a wide range of aircraft!
40Kgcm High Torque Servo Motor (S8218)
In stock
The 40Kg-cm Servo Motor (S8218) is a well-designed and high-quality servo that is digital, and fitted with metal gears for reliability. This is a digital servo motor for a wide range of applications that requires high torque. You can control this servo motor with Arduino which is connect by jumper wires and powered by battery.
The metal gears ensure long life and torque conversion. It is made of high-quality material, which may make your operation much more remarkable. This product is a metal gear high torque servo motor.
40KV HIGH VOLTAGE GENERATOR
In stock
Uses: Widely used for 105 high-voltage generator, high voltage ignition, teaching experiments.
Package Includes:-
1x 3-6v to 400kv boost step-up power module.
40X1 BERG MALE 90 DEGREE
In stock
1×40 Right Angle Male Berg Strip connectors are made to fit. These are breakable to length.
Also, custom PCBs or general custom headers use these types of connectors.
These connectors are bent at a 90° angle, which is suitable for many applications where the connectors are many times like prototyping.
420PCS DIY Blocks Education set – Mechanical Assembly
In stock
WARNING:
Not recommended for children under 3 years of age because of small parts.
Please note that because of the way some parts and instructions are packaged in sets, some minor wearing and / or scratching (especially on larger parts) is inevitable.
Product Included:
1*420 PCS bricks sets (Paper Box)
If you have any questions about product, please feel free to contact me.
We accept bulk order, dropshipping and customized product
433 MHz 2.5dbi Omnidirectional folding
In stock
This is a 433 Mhz 2.5dbi Omnidirectional Folding Antenna gain antenna. The subject of the auction is a set of elements needed to perform the modification of the tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional. These are also the perfect antenna for building custom 3G/4G/LTE Routers using MikroTik and Sierra Wireless cards
433 Mhz 3dbi magnetic mount
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
433 MHz antenna TX433-XPA100
In stock
Head Sucker 433 MHz antenna TX433-XPA100 GSM Antenna comes with a 1-meter feeder cable. The Antenna base equips a magnetic base to make it easy to place your antenna anywhere at your convenience.
433Mhz 100mW Radio Telemetry Kit
In stock
This is 433Mhz 100mW Radio Telemetry V2 Kit is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source which is, of course, the reason we are able to use it on our own version at Unmanned Tech.
The Unmanned Telemetry Kit is compatible with Ardupilot or Pixhawk-based systems and allows you to easily add a two-way telemetry connection between your drone and ground station. This product comes with our full support and warranty as we are confident in the functionality and reliability of this item.
This is the new and improved V2 of the Unmanned Telemetry kit. The full features and specifications are listed below but the main features are that both air and ground module are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.
433mhz 3dbi antenna for lora
In stock
The 433MHz spring antenna is an important part of the wireless module. It is widely used in security monitoring, telephone, 3G, RFID, 2.4GHZ, smart water meter, gas, wireless meter reading, industrial remote control, LED screen graphic update, car anti-theft, tire Anti-riot, data transmission and other fields
45mm planetory gearbox motor 10/45/100/300 rpm
In stock
If you are searching for a motor with very high torque then this Planetary Gear DC motor – 10 RPM / 12V will fulfill your specification demands.
This Planetary Gear DC motor has the massive torque of 23 kg-cm at no load.
The planetary geared motors are always well known for their low backlash and higher efficiency characteristic to meet the higher expectation.
As these Epicyclic Gear Train motors are very popular amongst our Robotics designer.
So we must ensure them for the quality and performance of these motors.
For that purpose when we receive these Planetary DC Geared Motor, we get them out and start testing each motor in our lab for the extreme pushable limits they can withstand.
This is 12V DC motor which has a gearbox of 45mm diameter.
4CH Relay Shield 5v for Arduino
In stock
This Arduino Shield is a completely newly designed that is able to control 4 relays at a time. The max switching power DC 90W or AC 360VA gives direct control by Arduino Uno/DFRduino controllers through digital I/Os with external 9V supply. With built-in Xbee socket, it can be wireless remote controlled via Xbee/bluetooth/WPM.
This arduino relay shield is an ideal solution for home automation and robotics applications.
4CH Remote Control Transmitter Receiver Circuit KIT
In stock
Whether you’re working on an RC car, boat, or other toy models, this circuit ensures precise and reliable control. Operating on a 27MHz frequency, this transmitter and receiver circuit provides a range of up to 10 meters, making it ideal for hobbyists and enthusiasts. At its core, you’ll find an 8-pin encoder chip for precise control.
The transmitter board features four buttons for controlling different directions – left, right, back, and front movement. This circuit is designed for DC 3-4.5V working voltage, ensuring efficient and reliable performance.
4DOF ROBOTIC ARM KIT
In stock
Ardno/IoT compatible servo robotic arm is semi-assembled (Main parts are pre-fitted, so you can use this arm very easily and quickly) servo robotic arm. Other assembling instructions are provided. Ardno is not included with the kit. Complete robotic arm parts (Semi-Assembled), Nut-Bolts and 4 servo is included with the kit.
4G/3G/2G-PCB-698-960MHz & 1710-2700MHz 1/2 dBi (V1.0, UFL)
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
4mm Banana Socket Jack
In stock
4mm Banana Socket Jack for Banana Plug Terminal Connector is a 4mm banana plug spade connector. The connector is a nickel-plated aluminum alloy core with a hard plastic shell for insulation. This makes it durable and has stable performance.
4MM RCA SOCKET
In stock
4mm Banana Socket Binding Post Nut Banana Plug Jack Connector is a 4mm banana plug spade connector. The connector is made of nickel-plated aluminum alloy core with a hard plastic shell for insulation. This makes it durable and has stable performance.
4S 20A 18650 Lithium Battery Protection Board
In stock
- Four series of lithium battery protection board
- Overcharge protection,
- Over-discharge protection function,
- Short circuit protection function,
- Overcurrent protection function.
- A high-accuracy voltage detection circuit.