SHIELD &ACCESSORIES

Features:

1. Dual Interface Design
2. 30-Pin Connector
3. Enhanced Connectivity
4. Expansion Capabilities
5. Robust Build Quality
6. User-Friendly Design
7. Open-Source Compatibility

Features :

1. Depending on the surrounding environment and the sensitivity of the receiver the transmission distance may be affected.
2. Photo-detector and preamplifier in one package.
3. Internal filter for PCM frequency.
4. Improved shielding against EMI.

Features :

1. NRF24L01 RF interface.
2. for Nokia 5110 LCD interface.
3. bluetooth interface I2C interface.
4. for one PS2 joystick.
5. 2-Axis joystick.
6. Bluetooth / Serial interface.
7. I2C interface.
8. nRF24L01 interface.
9. Nokia 5110 LCD interface.
10. Interface connector.
11. Power switch to switch between 3.3 and 5V.

Features :

1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
3. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
4. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
5. Pull-down resistors keep motors disabled during power-up
6. Big terminal block connectors to easily hook up wires (18-26AWG) and power
7. Arduino reset button brought up top
8. 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
9. Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
10. Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!

Product features:

• This module USES L298N as the main drive chip, with strong driving ability, low heat, and strong anti-interference ability.
• Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage greater than 12 v, please use the external power supply 5 v logic.
• This module USES a large capacity filter capacitance, and a continuation protection diode, which can improve reliability.

Features :

1. It’s a 100% pro micro Arduino Compatible Board.
2. Chip: ATmega32u4
3. Board Mode: LEONARDO R3
4. Color: As shown in the pictures

Features :

1. Board will run from 2V to 5V.
2. The latest version of the LilyPad supports automatic reset for even easier programming.
3. The backside of the LilyPad is now completely flat!
4. We now use a surface mount programming connector to keep the header from poking through.
5. This version of the LilyPad now uses the new ATmega328 at 8MHz.
6. Arduino 0016 supports the Pro Mini Arduino 328/8MHz/16MHZ.
7. Use this setting when using this new LilyPad 328.

Features

• Automatic reset during program download
• Power OK blue LED
• Green (TX), red (RX), and orange (L) LED
• Auto-sensing/switching power input
• Small mini-B USB for programming and serial monitor
• ICSP header for direct program download
• Standard 0.1” spacing DIP (breadboard friendly)
• Manual reset switch

Features :

1. Compatible with Arduino NANO.
2. All digital and analog pins breakout.
3. Compact size.
4. External power supply current support.
5. Leads all pins out, convenient for wiring and doing experiments.

Features:

1. 3 axis stepper motor driver

2. Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.

3. 2A can be controlled within the two-phase four-wire stepper motor.

4. Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.

5. Released the I2C interface, you can connect to the LCD I2C or other I2C module.

6. Power DC5V interface, 7.5-12V voltage input.

7. GRBL compatible

8. Worked with aduino nano.

Features :

1. ATmega328 running at 16MHz with external resonator (0.5% tolerance).
2. 100% Arduino compatible board.
3. Max Output Current: 150mA.
4. Over-current protected.
5. Reverse polarity protected.
6. 0.8mm Thin PCB.
7. USB connection off-board.
8. Supports auto-reset.
9. Onboard Power and Status LEDs.

Features: 

1. Electronic module AVR for ATMEGA328P adapter board.
2. Ultra-fast response, strong anti-interference ability and high-cost performance.
3. Compatible with Arduino NANO
4. All digital and analogue pins breakout
5. Compact size
6. Leads all pins out, convenient for wiring and doing experiments.

1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
3. An IC pattern for adding DIP ICs up to 20 pins
4. Power rails down the middle and sides
5. A reset button and an extra general use button
6. Two 3mm general use LEDs, red and green, as well as 2 matching resistors
7. A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
8. A surface-mount chip area for up to 14 SOIC size parts
9. Compatible with tiny breadboards
10. Every pin is brought out!
11. Gold plated pads
12. 2 x 0.1uF capacitors on either side for extra power stability

1. Retain the merits of the V4.0 version
2. Laminated design
3. PCB immersion gold processing technology
4. IIC interface
5. Bluetooth module communication interface
6. SD card module communication interface
7. APC220 wireless rf modules communication interface
8. RB URF v1.1 ultrasonic sensors interface
9. 12864 LCD string of line and parallel interface
10. 32 servo controller interface

Features :

1. Stackable design, easy to plug into the ARDUINO development board.
2. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
3. Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
4. 3.3v and 5v dual power output.
5. 3.3v and 5v IO compatible.
6. USB 2.0 protocol.
7. Bitbang mode ready.
8. Easily connected to a PC via mini USB Cable.
9. XBee-setting support software X-CTU.