ANTENNA

This is an AC8265 Wireless NIC for Jetson Nano WiFi / Bluetooth. The module is used to receive signals through NIC.NIC allows both wired and wireless communications. NIC allows communications between computers connected via local area network (LAN) as well as communications over the large-scale network through Internet Protocol (IP). This module contains two antennas that are used to attract the signals.

• Radio communication systems
• Aerospace industry for accurate communication equipments
• Military and space application
• Ships and navy communication systems
• Satellite communications
• RF equipment in medicine and healthcare.

This is an Omni-directional antenna with an IPEX connector. Its working frequency is 2.4GHz which meets most requirements of Wi-Fi devices. With 6dBi high gain, it offers robust signal reception and transmission.

A unique solution to connect your smart devices to the cloud. The antenna supports GSM 850/900/1800/1900 MHz and UMTS bands. Designed for small devices, this antenna will work when used as a wireless terminal, gateway or access point. It is a ground plane independent design, housed in a rugged waterproof plastic casing. It can be used outdoors in any type of telemetry project, as well as for discreet in-vehicle installations. It comes with high-quality adhesive tape that allows the antenna to adhere to any surface. Please note that the antenna is not designed to be mounted on large metal surfaces as this will affect the antenna coverage.

This is GSM 4G/3G/2G LTE Flexible Magnetic Mount Antenna having Frequency of 698 – 960 MHz & 1710 – 2690 MHz and  6/ 7 dBi  Gain. This antenna is supported to GSM FCT of Micromax, and other GSM Module/Modems. Magnetic mount antennas are commonly used for car and truck applications. The antenna’s magnetic base sticks securely to the metal of the vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since magnetic mount antennas require a ground plane, they should be mounted on metal.

This is a 2dBi Gain Dual Band 3G / 4G LTE Antenna with an SMA-Male connector having a frequency of  900M 1800mhz

This compact GSM900/1800 omnidirectional “rubber-duck” GSM antenna provides broad coverage. It is a coaxial sleeve design with an omni-directional pattern.

This antenna was also designed to transmit on the 900mhz frequencies with a top end transmission not to exceed 25 watts. Works for the current Mobile Communication.

A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. One of the main reasons to use a helix antenna is its low cost and compact size.

A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of  865MHz to 868MHz with a gain of 1.5dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna.

This is a PCB Antenna having a frequency of 698-960MHz & 1710-2690MHz with 1.5dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is Lora Antenna 433mhz serial WIFI wireless transmitter module gain antenna. The subject of the auction is a set of elements needed to perform the modification of the tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional.

This is Lora Antenna 868MHz serial WIFI wireless transmitter module gain antenna. The subject of the auction is a set of elements needed to perform the modification of the tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional. These are also the perfect antenna for building custom 3G/4G/LTE Routers using MikroTik and Sierra Wireless cards

This is Lora Antenna’s 915MHz serial WIFI wireless transmitter module gain antenna. The subject of the auction is a set of elements needed to perform the modification of the tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional. These are also the perfect antenna for building custom 3G/4G/LTE Routers using MikroTik and Sierra Wireless cards

A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of 865 MHz to 868 MHz with a gain of 1.5 dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.

This is Screw Base Dual-Band Mount Antenna having a frequency of 824 – 960 MHz & 1710 – 2170 MHz and gain of 4/6 dBi. This antenna is supported to GSM FCT and other GSM Module/Modems. The biggest advantage to dual-band antennas is their ability to provide a strong, stable wireless connection is often difficult to reach locations. For this reason, they are often used in devices such as cellular or dual-band wireless access points. 

A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of  2400 – 2483 MHz with a gain of 1.5dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.

This is Rubber Duck Antenna with Right Angle fold-able Connector having a frequency of 2400 MHz and 3dBi Gain,

This is LWC-4G-SCREW-06 GSM 4G/3G/2G LTE Flexible Screw Base Mount Antenna having Frequency of 698 – 960 MHz & 1710 – 2690 MHz and  6/ 7 dBi  Gain. This antenna is supported to GSM FCT of Micromax, and other GSM Module/Modems. Screw mount antennas are commonly used for car and truck applications. The antenna’s Screw base can be fitted permanently to any metal surface and direction with the screw provided at the base of the antenna vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since Screw mount antennas require a ground plane, they should be mounted on metal.