Hex Pixhawk Cube+ Flight Controller Autopilot

Processor
- 32bit ARM® STM32H753 Cortex®-M7（with DP-FPU; Cube Orange+ uses ARM® STM32H757
- 400 Mhz/1 MB RAM/2 MB Flash
- 32 bit STM32F103 failsafe co-processor
Sensors
- Three redundant IMUs (Accelerometers/Gyroscopes), Two Barometers, One Magnetometer
- All sensors connected via SPI.
- ICM 20649 integrated accelerometer / gyro, MS5611 barometer on base board
CubeOrange: – InvenSense ICM20602 IMU,ICM20948 IMU/MAG, MS5611 barometer on temperature controlled, vibration isolated board

CubeOrange+: – Invensense ICM42688 IMU, ICM20948 IMU/MAG, MS5611 barometer on temperature controlled, vibration isolated board
- AK099916 MAG

Add to wishlist

Compare

19 People watching this product now!

6000 +

Products

10:00am - 7pm

Working Hours

Genuine Products

Guaranteed

Description

The Cube Orange autopilot is the latest and most powerful model in the Cubepilot ecosystem. Designed for hobby users, commercial system integrators and UAS manufacturers the Cube Orange autopilot is part of a wide ecosystem of autopilot modules and carrier boards. All Cube models are compatible with all carriers which allows users to choose an off the shelf carrier board that best suits their needs. System designers are able to integrate the Cube directly into their designs via published carrier board specifications.

The Cube Orange is available as a standalone module or as a package with a new updated version of the original carrier board that now includes an integrated ADS-B In module from uAvionics.

ADS-B Carrier Board

The new ADS-B carrier boards overall footprint is identical to the standard versions and the main changes compared to the original carrier are as follows:

Integration of uAvonix ADS-B IN Receiver on Serial 5
Built-In ADS-B Antenna
Removal of Intel Edison Bay and Debug USB Ports

Additional information

Supported RC signals	PPM/SBUS/DSM
Power redundancy	Triple redundancy
Sensors details	IMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro)
Supported firmware Ardupilot	PX4, and Hionos 00-178C
Additional Specs	Carrier Board Size (mm): 94 x 44.3 x 7.3, Chassis Material: CNCAluminum Alloy(cube) +ABS Molding(Carrier Board), Cube Size (mm): 38.4 x 38.4 x 22